Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Mahesh_Kudva
Participant
Jump to solution

How to get Part Number

Hi

 

I am looking to get the "Part Number" from a CP device. I can get the "Model Number" from either "show asset all" or  "dmiparse System Product"

Is there a way to get the Part Number?

 

Thanks

2 Solutions

Accepted Solutions
Maarten_Sjouw
Champion
Champion
You could derive it from cplic print, as that is the only place where the model name is, except for the blades, unless you can write a script to combine the different blade licenses to the right bundle.
The appliance name is already in the license like this: cpap-sg1560x
Regards, Maarten

View solution in original post

0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Hi @Mahesh_Kudva 

More read here:

Appliance model from CLI and dmidecode with full model list

PS:
I will add the 6xxx and 15xxx appliances next week.

➜ CCSM Elite, CCME, CCTE

View solution in original post

0 Kudos
11 Replies
_Val_
Admin
Admin

Which model and software version are you using? The answer will depend on both

0 Kudos
Mahesh_Kudva
Participant

Product version Check Point Gaia R77.30
OS build 2
OS kernel version 2.6.18-92cpx86_64
OS edition 64-bit

Do we have any SK articles that will help?

0 Kudos
_Val_
Admin
Admin

Model?

0 Kudos
_Val_
Admin
Admin

On Gaia appliance, run from CLISH

>show asset system

and look for "Serial Number". If that does not help, use either

 

>show interface Mgmt

or 

>show interface eht0

depending on the model. Mac address of the primary interface is the also the serial number. Or, look at the sticker at the back of the appliance. Some more details here:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

0 Kudos
Mahesh_Kudva
Participant

Thanks for the information. The Part Number is typical "CPAP-1200-NGFW" or something like that. "Model Number" and "Part Number" are 2 different things.

0 Kudos
_Val_
Admin
Admin

Oh boy, you are looking for the product name then.

 

Take the appliance ID and go to your UserCenter. You will find it there among your products, in the assets list

0 Kudos
Maarten_Sjouw
Champion
Champion
Try: cpstat os
Regards, Maarten
0 Kudos
Mahesh_Kudva
Participant

"cpstat os" also gives the same output

0 Kudos
Maarten_Sjouw
Champion
Champion
You could derive it from cplic print, as that is the only place where the model name is, except for the blades, unless you can write a script to combine the different blade licenses to the right bundle.
The appliance name is already in the license like this: cpap-sg1560x
Regards, Maarten
0 Kudos
Mahesh_Kudva
Participant

Thanks

This is the nearest I have got. And I think this is the best we can get.

Basically we are updating our database to get most of the information. The same part number information in Cisco can be obtained from "show inventory".

0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Hi @Mahesh_Kudva 

More read here:

Appliance model from CLI and dmidecode with full model list

PS:
I will add the 6xxx and 15xxx appliances next week.

➜ CCSM Elite, CCME, CCTE
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events