DNS traffic seen over SYNC interface with dummy MAC addresses?

[Thomas_Eichelbu]

Hello Team, 

iam totally stunned.
did anybody ever did a tcpdump on the SYNC interface?

today we had an outage of DHCP ... and saw this:

15:39:35.025896 LANX1 Out ifindex 4 00:1c:7f:b8:08:a7 ethertype IPv4 (0x0800), length 375: 10.10.227.253.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, length 327

15:39:35.025942 LANX2 In  ifindex 5 02:0b:0c:00:00:01 ethertype IPv4 (0x0800), length 375: 10.10.227.253.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, length 327

00:1c:7f:b8:08:a7 is my lovely Appliance (Quantum Spark 1900, R81.10.15)
10.10.227.253.67 > 255.255.255.255.68 my DHCP reply as i would expect it 

but what is 
02:0b:0c:00:00:01 and it sends with the IP of my FW???

people had severe DHCP issues, no lease optained a ton of "Local Adress Spoofing" logs

Suddenly it got better, noi idea why

i searched for this MAC and made a tcpdump on all my inteface to find it ... and here it is .. on the SYNC!

[Expert@NWATKOEFIRE01]# tcpdump -penni LAN18 not 8116
tcpdump: can't parse filter expression: syntax error
[Expert@XXXXX]# tcpdump -penni LAN18 not port 8116
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on LAN18, link-type EN10MB (Ethernet), snapshot length 262144 bytes
17:13:52.872584 dc:68:0c:75:de:fb > 01:80:c2:00:00:00, 802.3, length 105: LLC, dsap STP (0x42) Individual, ssap STP (0x42) Command, ctrl 0x03: STP 802.1s, Rapid STP, CIST Flags [Learn, Forward, Agreement], length 102
17:13:53.063239 02:0b:0c:00:00:01 > 00:1c:7f:b8:08:a5, ethertype IPv4 (0x0800), length 85: 10.254.5.139.54191 > 10.10.2.23.53: 12243+ A? delivery.mp.microsoft.com. (43)
17:13:53.063259 02:0b:0c:00:00:01 > 00:1c:7f:b8:08:a5, ethertype IPv4 (0x0800), length 76: 10.254.5.139.54191 > 10.10.2.23.53: 57262+ A? appex-rf.msn.com. (34)
17:13:53.063273 02:0b:0c:00:00:01 > 00:1c:7f:b8:08:a5, ethertype IPv4 (0x0800), length 69: 10.254.5.139.54191 > 10.10.2.23.53: 30101+ A? aadrm.com. (27)

i checked other FWs as well!
i see this on all FW´s  (Ful GAiA R81.20, HFA8X) i have checked, non existing MAC´s are doing DNS, mostly DNS to the configured DNS Servers, with the SRC IP of the proper interface according the routing table ...

for example:

16:50:50.451160 02:0b:02:00:00:01 > 00:1c:7f:a1:b2:82, ethertype IPv4 (0x0800), length 74: 10.254.4.99.41885 > 10.10.1.22.53: 1547+ A? checkpoint.com. (32)
16:50:50.451186 02:0b:02:00:00:01 > 00:1c:7f:a1:b2:82, ethertype IPv4 (0x0800), length 74: 10.254.4.99.57458 > 10.10.1.23.53: 1547+ A? checkpoint.com. (32)

could somebody enlighten me?
thank you!

[the_rock]

Hm...that is odd. I just tested in the lab and when I initiate traffic on windows 11 PC behind my cluster, dont see any of this. Below is all I get.

Andy

[Expert@CP-FW-01:0]# tcpdump -enni eth3 not port 8116
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth3, link-type EN10MB (Ethernet), capture size 262144 bytes
11:27:27.901405 e8:1c:ba:4e:89:87 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 172.16.10.69 tell 172.16.10.1, length 46
11:27:28.901550 e8:1c:ba:4e:89:87 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 172.16.10.69 tell 172.16.10.1, length 46
11:27:28.938840 8c:85:c1:a6:23:31 > 01:80:c2:00:00:00, 802.3, length 105: LLC, dsap STP (0x42) Individual, ssap STP (0x42) Command, ctrl 0x03: STP 802.1s, Rapid STP, CIST Flags [Learn, Forward, Agreement], length 102
11:27:28.981573 e8:1c:ba:4e:89:87 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 172.16.10.21 tell 172.16.10.1, length 46
11:27:29.216280 ac:71:2e:70:39:c9 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 172.16.10.69 tell 172.16.10.68, length 46
^C
5 packets captured
5 packets received by filter
0 packets dropped by kernel
[Expert@CP-FW-01:0]#

[the_rock]

@Thomas_Eichelbu 

FWIW, not sure if this might be related, but this is how I always set it up in topology for the sync.

Andy

 

[Thomas_Eichelbu]

ok ok, why defined by routing table, i do 

+ if its not a transfer link, nor any other Anti Spoofing groups etc.

Leads to This Network (Internal)

[the_rock]

Yea, that should work as well, but I found with setting I have works the best.

Andy

[Thomas_Eichelbu]

Hello

This is exactly what all my customers ask, "Are we the only one with this problem?"
i just say,  Yes you are.

[Thomas_Eichelbu]

Ahhh maybe its this:


Traffic from the Standby member to any other host goes through the SYNC interface
https://support.checkpoint.com/results/sk/sk167453

it caused  so much panic .. 

[the_rock]

I found that same sk before, but forgot to send.

Andy

[JozkoMrkvicka]

Are you sure MAC of SYNC interface is really 02:0b:0c:00:00:01 ? Looks very strange, maybe you have enabled Virtual MAC (VMAC) feature ?

[the_rock]

hahaha, I feel your "pain" lol

Andy