CoreXL connections not distributed correctly between the cores

[Dyslexic155]

Hello Experts,

Yesterday we had an issue where the connections were not distributed correctly by the CoreXL.

High CPU was noticed in few cores, and after checking fw ctl multik we saw that coreXL was distributing only the connections to a few cores and not to all.

The issue was solved by rebooting the firewall.

Is it possible to know the reason of the issue and can it happen again?

I have attached output for fw ctl multik before the reboot, and more commands after the reboot.

We are running R80.30

Thanks in advance,

[Timothy_Hall · Accepted solution]

This is a known issue fixed in R80.30 Jumbo HFA Take 219+, a workaround is also available as described here:

sk168513: CPU consuming on some instances is high after installing R80.30 Jumbo Hotfix Accumulator T...

[genisis__]

Tim,

As there does not appear to be a way to use SNMP to monitor a specific VS CPU usage (not that I can see, easily using enterprise standard tools) , I was wondering how we can actually confirm how many CPUs to actually allocated a VS?

Using 'fw ctl multik stat', looking at the peaks connections are there any guidelines to determine recommended peaks/connections per core?

Lets say I've allocated 10 cores to a VS and top is reporting 600% utilisation, does this mean I can safely reduce the cores down to 8 (leaving 2 cores for spikes)?

Without history graphing is seems almost impossible to balance the right number of cores and forward plan core requirements.