Configuring the ISP redundancy

Narrah_Munthali · ‎2018-08-28

I have an appliance 3000 running GAIA R80.10 and would like to configure ISP redundancy. My question is, is it possible to have this setup in this appliance ? the documentation does not have that much information.

waiting for your responses.

PhoneBoy · ‎2018-08-28

Yes, instructions are in the ClusterXL Admin Guide.

ClusterXL R80.10 (Part of Check Point Infinity) Administration Guide

Narrah_Munthali · ‎2018-08-30

Thanks for the guide its really helpful. I have just discovered that the first gateway was not configured in cluster. Is it possible to change it and make it primary without starting the configurations again?

PhoneBoy · ‎2018-08-30

Just set the cluster member you want as primary with a higher priority (or adjust the other one with a lower priority).

This is done in the cluster object under Cluster Members.

Narrah_Munthali · ‎2018-09-10

Thanks for the info. I was able to work on the redundancy. looking out for another checkpoint project.

Mitchell_gayle · ‎2018-09-22

Are you able to reduce the redundancy? how did you actually do it? I want to do the same.

Narrah_Munthali · ‎2018-09-23

I configured mine as load balancing not primary and secondary. its able to share the load. Can you give me more details on your configuration?