Create a Post
Showing results for 
Search instead for 
Did you mean: 

Check_Point_R80.10_T479_Gaia.iso happened loop booting process in EVE-ng lab

Hi all, I was faced the issue of booting process are loop and not go ahead porperly running. I have already done step by step the guide line of EVE-ng page to setup the CheckPoint iso file and also completed initial gia install that I have choosen the static management IP and the rest of step are default and ok click as well as admin password given.  Please check below error description and logs via telnet and I hope your solution reply for fix this issue. Thank you. Pls help me -



Reading all physical volumes. This may take a while...
No volume groups found
Volume group "vg_splat" not found
mount: could not find filesystem '/dev/root'
setuproot: moving /dev failed: No such file or directory
setuprKernel panic - not syncing: Attempted to kill init!
oot: error mount
Entering kdb (current=0x875c15b0, pid 1) on processor 0 due to KDB_ENTER()
pnp: PnP ACPI: found 7 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1650735565.781:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)

bypass version 3.0.0
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
PCI: Setting latency timer of device 0000:00:01.1 to 64
ide0: BM-DMA at 0xc100-0xc107, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc108-0xc10f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 167772160 sectors (85899 MB) w/256KiB Cache, CHS=16383/255/63, (U)DMA
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: (supports S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 473k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
SCSI subsystem initialized
HP CISS Driver (v 3.6.28-20 )
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
Kernel panic - not syncing: Attempted to kill init!
wdt stop function not defined
Stack traceback for pid 1
0x875c15b0 1 0 1 0 R 0x875c1760 *init
esp eip Function (args)
0x875c7f34 0x8051d599 kdb_panic+0x19
0x875c7f34 0x806a6185 notifier_call_chain+0x25 (unknown, unknown, unknown)
0x875c7f48 0x8043c1b8 atomic_notifier_call_chain+0x8 (unknown)
0x875c7f4c 0x8042e965 panic+0x65 (0x806d1b58)
0x875c7f64 0x804321a2 do_exit+0x832 (0x100)
0x875c7fa4 0x804322a3 do_group_exit+0x33 (0x100)
0x875c7fb4 0x804322fd sys_exit_group+0xd (0x1)

Press any key to see the boot menu [Booting in 5 seconds]
Press any key to see the boot menu [Booting in 4 seconds]
Press any key to see the boot menu [Booting in 3 seconds]
Press any key to see the boot menu [Booting in 2 seconds]
Press any key to see the boot menu [Booting in 1 seconds]"

0 Kudos
2 Replies

R80.10 is End of Support and doesn't necessarily support qemu (the underlying hypervisor used by EVE-ng).
The error suggests it cannot find the drive to finish the boot process, which suggests you may have configured the storage emulation incorrectly.

In any case, I recommend trying R81.10 which is the widely recommended release as of present.


Now I'm ok after changed another EVE-ng VM (old VM got in training) that I was added the same image and configuration. Thank you for your replied and plese see below boot process.

"PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Reading all physical volumes. This may take a while...
Found volume group "vg_splat" using metadata type lvm2
2 logical volume(s) in volume group "vg_splat" now active"

0 Kudos