Appliance root partition

[Alex-]

I wonder if there's still a reason to cap root partition at 32G on appliances, when open servers can be adjusted during installation.

For instance, I've been installing a large VSX environment with high-end appliances fitted with reasonable SSD drives and with a mix of blades the root partition is already almost full while /var/log will barely be used.

Consider this:

Filesystem                       Size  Used Avail Use% Mounted on
/dev/mapper/vg_splat-lv_current   32G   31G  1.8G  95% /
/dev/md0                         291M   62M  214M  23% /boot
tmpfs                             47G  141M   47G   1% /dev/shm
/dev/mapper/vg_splat-lv_log      292G   21G  272G   7% /var/log
cgroup                            47G     0   47G   0% /sys/fs/cgroup

I had a discussion with PS folks who told me that some blades share components or online updates so they're sort of active even if not all blades are active on all VS and in the case of VSX some of these components are duplicated by design on each VS which can lead to that kind of situation. But I've also seen non-VSX installations nearing full capacity when all blades are active over time, and I'm speaking of latest OS versions and hotfix.