Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Wolfgang
Authority
Authority
Jump to solution

AD-query failed with Microsoft Windows Server 2022

Hello CheckMates,

with Windows Server 2022 Microsoft changed the default behaviour of the RPC authentication level.

Following this AD-query failed (remote login not possible, access roles not enforced etc.) Available in the knowledgebase is this article

Check Point response to CVE-2021-26414 - "Windows DCOM Server Security Feature Bypass" 

There is a steatment "Check Point R&D is working on a permanent solution for this issue."

Any solutions for this problem or a timeline when available?

Wolfgang

0 Kudos
1 Solution

Accepted Solutions
David_Herselman
Advisor

Windows Server 2022 is unfortunately still simply incompatible with ADQuery, there is no work around so you would need to use the Identity Collector instead of ADQuery:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

View solution in original post

0 Kudos
24 Replies
_Val_
Admin
Admin

There is a workaround in the case. Did you see the link to the MS article in the comments?

0 Kudos
Wolfgang
Authority
Authority

@_Val_ yes, I see. But the solution is to lowering the security on the Microsoft site. I know identity collector is the better solution but at the moment we are using only AD-query.

0 Kudos
JeanMarc_C
Explorer

Are you sure the workaround works on server 2022 as well and not only on previous versions having the update for CVE-2021-26414 ? The MS kb article states that the workaround will not be possible anymore in some times and server 2022 is not listed. So possibly server 2022 is already in this state.

0 Kudos
Wolfgang
Authority
Authority

@JeanMarc_C  yes you're right. With 2022 this does not work. We tried this but AD query  was failing again. Reading again Microsofts knowledgebase article let us realize that it's not supported with 2022 (same as you mentioned). I forgot about it to post here. The solution is to switch to Identity Collector. 

There should be a hint in the documentation that AD query does no more work with domain controller on Microsoft Server 2022.

JozkoMrkvicka
Mentor
Mentor

AD query on Microsoft Server 2022 wont never work or till Check Point will release the fix?

Kind regards,
Jozko Mrkvicka
Wolfgang
Authority
Authority

Looks like you have to install KB5005619  on Microsoft server 2022 and then you can set the mentioned registry value to disabled. But after Q2 2022 this will be no more available. Have a look at the timeline in KB5004442—Manage changes for Windows DCOM Server Security Feature Bypass (CVE-2021-26414) 

@_Val_ please would you check internal regarding AD query and Microsoft Windows server 2022.

0 Kudos
Royi_Priov
Employee
Employee

Hi @Wolfgang,

Unfortunately, there is no simple fix here to adjust AD Query to work with this security enhancement.

We are still investigating the amount of effort needed here, but I can say it will not take few weeks.

As the SK stated, this is a problem which only AD Query suffers from, and Identity Collector which uses different method for acquiring identities works with no change.

I will revise the SK with the needed info raised on this thread - thanks for sharing.

Thanks,
Royi Priov
Group manager, Identity Awareness R&D
_Val_
Admin
Admin

Thanks Royi, we appreciate the transparency.

0 Kudos
SGInfra
Explorer

Hello,

What solution or workaround would be for Gaia Embedded devices (15xx Appliances)? those don't have option to use Identity Collector.

ID Awareness Screenshot.png

 Thanks,

Raitis Robeznieks

0 Kudos
PhoneBoy
Admin
Admin

Share identities from a gateway that can.
This could even be a two-core VM off to the side running regular Gaia. 

0 Kudos
JeanMarc_C
Explorer

I had a ticket with support for this, and there is an ETA to support server 2022 and the security strengthening according the MS KB for end of January 2022. In the meantime workaround or solution is to work with Identity collector (which is better than AD query), share identities between gateways, or use Identity Agent.

It is however not 100% clear if AD 2022 with the registry key change according MS KB is meant to work or not. In my case, on embedded R77.20, it does not work but change the status of the AD from "internal error" to  "bad credential".

 

0 Kudos
SGInfra
Explorer

Thank You, PhoneBoy for your suggestion.

I have disabled AD Query for all embedded devices, and enabled them to get shared identities from those appliances, that use ID Collector.

Will see, how this will work. I was afraid, that using ID Sharing Identities will not work, it requests/traffic is not processed through GW, that is Identity source. (for example on-site local traffic between separated interfaces/subnets).

Best Regards,

Raitis

 

0 Kudos
Royi_Priov
Employee
Employee

Hi Raitis, @SGInfra 

Identity Sharing mechanism will allow more efficient way to save identities. For example, gateway which handle traffic for specific subnets, will get the identities which are part of this subnet only. This design allows each gateway to receive the needed identities only, and not process unneeded sessions.

Thanks,
Royi Priov
Group manager, Identity Awareness R&D
0 Kudos
SGInfra
Explorer

Hi, Royi_Priov, and Thanks for Your advice.

Solution with Shared identities Works fine.

In our topology we have 4 GW running regular Gaia and 6 Gaia embedded appliances.

One of Regular Gaia is central GW for all other devices (sites) in star Community VPN.

I have pointed each Embedded device, to get shared Identities form Central GW and one other Regular Gaia device, that is related (As parrent) site for that branch. 

Thanks also to PhoneBoy for provided solution.

 

B.R.

Raitis

 

0 Kudos
MikeB
Advisor

So, SMB clients with just Quantum Spark appliances also need to buy and maintain a license for VM GAIA just for this task? I have not heard of any other vendor with this problem and forcing you to purchase additional licenses for a feature you are supposed to have already paid for. This is not good

0 Kudos
Chris_Atkinson
Employee Employee
Employee

R81.X alignment will allow SMB appliances to leverage Identity Collector, stay tuned for the EA (or enquire with your local SE).

CCSM R77/R80/ELITE
BeaconBits
Contributor

@Royi_Priov,, Has SK been revised and updated?

Thanks!

0 Kudos
Royi_Priov
Employee
Employee

@BeaconBits, yes:

To work without any functionality issues, follow the procedure in this Microsoft article:
https://support.microsoft.com/en-us/topic/kb5004442-manage-changes-for-windows-dcom-server-security-feature-bypass-cve-2021-26414-f1400b52-c141-43d2-941e-37ed901c769c
A fix might be needed to apply this procedure, please check "Availability" section in the above article.



Thanks,
Royi Priov
Group manager, Identity Awareness R&D
0 Kudos
David_Herselman
Advisor

The method of setting the registry key unfortunately makes no difference on an up to date Windows 2022 AD server. Herewith the registry entry we set:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole\AppCompat]
"RequireIntegrityActivationAuthenticationLevel"=dword:00000000

 

Hoping R&D can provide a fix that remediates this problem, what's happened in the 6 months since Microsoft raised awareness of this upcoming change?

 

Perhaps developers could look to see how other libraries (eg Samba) handle the requirement?

rpc_c_authn_level_pkt_integrity.png

 

PS: We are running R81 with NTLMv2, LDAPS and Kerberos encryption type aes256-cts-hmac-sha1-96.

0 Kudos
Enyi_Ajoku
Collaborator

@Royi_Priov do you have an update to this yet?

0 Kudos
Naftali_Oziel
Collaborator

There appears to be a custom fimrware r77.20.87 B127 that fixes this, anyone tried it?

0 Kudos
D_W
Advisor

Are there any news if Windows Server 2022 is now supported by AD Query?

0 Kudos
David_Herselman
Advisor

Yes, Jumbo Hotfix Accumulators include changes to make AD Query compatible with this.

 

Microsoft documented the changes with regards to DCOM hardening in the following knowledge base article:

https://support.microsoft.com/en-us/topic/kb5004442-manage-changes-for-windows-dcom-server-security-...

 

Summary:

A Microsoft Windows Active Directory Domain Controller (AD DC) will, after being rebooted after the 14th of June 2022, no longer respond to non-signed DCOM packets when they arrive. One can implement a temporary work around to continue receiving and processing unsigned packets, but functionality of this work around ends on the 14th of March 2023.

 

How to implement temporary work around:

  • Login to your AD DCs and make the following registry change, please reboot the DCs after making this adjustment for the change to take effect
  • Start -> Run -> regedit
  • Copy & paste the following registry key path in to the address bar of regedit:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole\AppCompat
  • Create a new DWORD registry item called RequireIntegrityActivationAuthenticationLevel, with a decimal value of 0

 

CheckPoint, as many other vendors, took a while to refactor their code to make use of the new requirement. CheckPoint integrates to a wide variety of devices for identity awareness information and includes two methods to learn IPs of workstations joined to a domain provided by AD DCs. The ADQuery method uses DCOM to subscribe to Security Event logs which essentially inform the firewall of what user authentication sessions originated from what PCs and another which runs as an application on a workstation or server in the network and presents a consolidated stream of authentication events from all AD DCs to a firewall without it being individually configured for each DC in the network.

The change requires the installation of a JHA (Jumbo Hotfix Accumultator) which introduces support for the new method. This update is however only available for all versions in active support.

 

Example entry from the R80.40 JHA take 158 changelog confirming support for Microsoft's response to CVE-021-26414:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

image.png

David_Herselman
Advisor

Windows Server 2022 is unfortunately still simply incompatible with ADQuery, there is no work around so you would need to use the Identity Collector instead of ADQuery:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events