Show Maestro Transceiver Status - One-liner

[Danny]

ℹ️ Check Point Maestro - FAQ

One-liner (Bash) to verify transceivers on Maestro HyperScale Orchestrators (MHO):

echo;echo Collecting transceiver data...;tor_util get_all_ports_optic_enf_st -v|grep is|tr ' ' '\n'|tr -d ,|grep [[:digit:]]|while read port;do echo "--------------- Port: $port ---------------";mlxlink -d $(mst status|grep direct|head -n1|awk '{print $1}') -p $port -m|sed '/Power\|Bias\|Volt\|Temp\|Alarm\|CDR\|Digit\|Wave\|Version\|Att\|Rev\|OUI\|Cable\|---\|Info\|Link\|Loop\|FEC\|Width/d';done|sed -z 's/\nStatus/Status/g'|more;transceiver_verifier -v|sed "s/[Uu]nsupported/"$'\033\[91m&\033\[0m/g'|sed -e "s/^[Ss]upported/"$'\033\[32m&\033\[0m/g';echo

One-liner (Bash) to verify transceivers on SGMs:

ifconfig|grep ethsBP|awk '{print $1}'|while read line;do echo $line;ethtool -m $line|more;echo;done

Integrated with our ccc script.

Thanks to @Tom_Kendrick for pointing me into the right direction.

[Lari_Luoma]

This is great! Thanks for sharing Danny! I usually use orch_stat -p and show maestro port x optic info to get all that information, but orch_stat -p works only on certain JHF level. Your oneliner should work regardless of the JHF status I believe.

[Danny]

I'm glad you like it. orch_stat is slower and the output is Check Point version specific.
I usually use the orch_stat -a one-liner from my Maestro MHO Ports Dump - Sorted & Colored tool, but that lacks detailed transceiver stats. So I created the one-liners above.

[ShemHunter]

Hi @Danny !

Hi!

What do the conclusions mean?:

ETH_AN_FSM_ENABLE
ETH_AN_FSM_GOOD_CHECK?

We have
State: Polling
Physical State: ETH_AN_FSM_GOOD_CHECK

[Danny]

I suggest to open a SR with Check Point TAC and ask them.