GAIA - Easy execute CLI commands on all gateways simultaneously

[HeikoAnkenbrand]

Now you can use the new command "gw_mbash" and "g_mclish" to execute bash or clish commands on all gateway simultaneously from the management server. All you have to do is copy and paste the above lines to the management server. After that you have two new commands on the management server. Here you can now centrally execute simple commands on all gateways which are connected via SIC with the management.

Attention!

You can quickly destroy your gateways if you enter the wrong commands!

Command syntax:

Command	Description
# gw_detect # gw_detect80	Detect all your gateways that support from this tool. This command only needs to be executed once or when gateways changed in topology. All founded gateways are stored as IP address in this file /var/log/g_gateway.txt. All added IP addresses will be used later to execute commands on these gateways. The file can also be edit manually to add gateway IP adressess. The execution of this command may take a few minutes. Use this command on R80.x gateways "gw_detect80" is a little bit faster. Use this command on R77.x gateways "gw_detect".
# gw_mbash <command>	Execute expert mode command on all gateway  simultaneously
# gw_mclish <command>	Execute clish command on all gateway  simultaneously

An example!

You want see the version of all gateway they are defined in the topology.

Management# gw_detect                                                   -> start this command fist to detect all your supported gateways or "gw_detect80" on R80.x gateways
Management# gw_mclish show version os edition        -> execute this command on all gateways

 

Now the command "show version os edition" is executed on all gateways and the output is displayed on the management server sorted according to the ip addresses of the gateways in the firewall topologie.

The same also works for the expert mode. For example:

Management# gw_detect                                                   -> start this command fist to detect all your supported gateways or "gw_detect80" on R80.x gateways
Management# gw_mbash fw ver                                      -> execute this command on all gateways

Tip 1

Use this command to backup your clish configs from all gateways. Management# gw_mclish show configuration > backup_clish_all_gateways.txt This can also be start as simply cronjob😀.

Tip 2

Check central performance settings for all gateways: Management# gw_mbash fw tab -t connections -s                         -> show state table for all gateways Management# gw_mbash fwaccel stat                                              -> show  fwaccel state's for all gateways Management# gw_mbash ips stat                                                       -> check on witch gateway ips is enabled ...

Cppy and paste this lines to the management server or download the script "new_multi_commands.sh" and execute the script.

echo '#!/bin/bash' > /usr/local/bin/gw_mbash
echo 'if [ ! -f /var/log/g_gateway.txt ]; then' >> /usr/local/bin/gw_mbash
echo 'echo "First start \"gw_detect\" and\or edit the file \var\log\gw_gateway.txt manually. Add here all your gateway IP addresses."' >> /usr/local/bin/gw_mbash
echo 'else' >> /usr/local/bin/gw_mbash
echo 'HAtest="$@"' >> /usr/local/bin/gw_mbash
echo 'echo $HAtest > /var/log/g_command.txt;' >> /usr/local/bin/gw_mbash
echo 'while read line' >> /usr/local/bin/gw_mbash
echo 'do' >> /usr/local/bin/gw_mbash
echo 'if $CPDIR/bin/cprid_util getarch -server $line |grep "gaia" > /dev/null;' >> /usr/local/bin/gw_mbash
echo 'then' >> /usr/local/bin/gw_mbash
echo 'echo "--------- GAIA $line execute command: $HAtest"' >> /usr/local/bin/gw_mbash
echo '$CPDIR/bin/cprid_util -server $line putfile -local_file /var/log/g_command.txt -remote_file /var/log/g_command.txt;' >> /usr/local/bin/gw_mbash
echo '$CPDIR/bin/cprid_util -server $line -verbose rexec -rcmd /bin/bash -f /var/log/g_command.txt' >> /usr/local/bin/gw_mbash
echo 'else' >> /usr/local/bin/gw_mbash
echo 'echo "--------- STOP $line Error:  no SIC to gateway or no compatible gateway"' >> /usr/local/bin/gw_mbash
echo 'fi' >> /usr/local/bin/gw_mbash
echo 'done < /var/log/g_gateway.txt' >> /usr/local/bin/gw_mbash
echo 'fi' >> /usr/local/bin/gw_mbash
chmod +x /usr/local/bin/gw_mbash

echo '#!/bin/bash' > /usr/local/bin/gw_mclish
echo 'if [ ! -f /var/log/g_gateway.txt ]; then' >> /usr/local/bin/gw_mclish
echo 'echo "First start \"gw_detect\" and\or edit the file \var\log\gw_gateway.txt manually. Add here all your gateway IP addresses."' >> /usr/local/bin/gw_mclish
echo 'else' >> /usr/local/bin/gw_mclish
echo 'HAtest="$@"' >> /usr/local/bin/gw_mclish
echo 'echo $HAtest > /var/log/g_command.txt;' >> /usr/local/bin/gw_mclish
echo 'while read line' >> /usr/local/bin/gw_mclish
echo 'do' >> /usr/local/bin/gw_mclish
echo 'if $CPDIR/bin/cprid_util getarch -server $line |grep "gaia" > /dev/null;' >> /usr/local/bin/gw_mclish
echo 'then' >> /usr/local/bin/gw_mclish
echo 'echo "--------- GAIA $line execute command: $HAtest"' >> /usr/local/bin/gw_mclish
echo '$CPDIR/bin/cprid_util -server $line putfile -local_file /var/log/g_command.txt -remote_file /var/log/g_command.txt;' >> /usr/local/bin/gw_mclish
echo '$CPDIR/bin/cprid_util -server $line -verbose rexec -rcmd /bin/clish -f /var/log/g_command.txt' >> /usr/local/bin/gw_mclish
echo 'else' >> /usr/local/bin/gw_mclish
echo 'echo "--------- STOP $line Error:  no SIC to gateway or no compatible gateway"' >> /usr/local/bin/gw_mclish
echo 'fi' >> /usr/local/bin/gw_mclish
echo 'done < /var/log/g_gateway.txt' >> /usr/local/bin/gw_mclish
echo 'fi' >> /usr/local/bin/gw_mclish
chmod +x /usr/local/bin/gw_mclish

echo '#!/bin/bash' > /usr/local/bin/gw_detect
echo 'echo -n > /var/log/g_gateway.txt' >> /usr/local/bin/gw_detect
echo "more $FWDIR/conf/objects.C |grep -A 500 -B 1  ':type (gateway)'| sed -n '/gateway/,/:ipaddr (/p' | grep 'ipaddr (' | sed 's/^[ \t]*//' | sed 's/\:ipaddr (//' |sed 's/)//' > /var/log/g_gwl.txt" >> /usr/local/bin/gw_detect
echo 'while read line' >> /usr/local/bin/gw_detect
echo 'do' >> /usr/local/bin/gw_detect
echo 'if $CPDIR/bin/cprid_util getarch -server $line |grep "gaia" > /dev/null;' >> /usr/local/bin/gw_detect
echo 'then' >> /usr/local/bin/gw_detect
echo 'echo "--------- GAIA $line "' >> /usr/local/bin/gw_detect
echo 'echo "$line" >> /var/log/g_gateway.txt' >> /usr/local/bin/gw_detect
echo 'else' >> /usr/local/bin/gw_detect
echo 'echo "--------- STOP no SIC to gateway or no compatible gateway"' >> /usr/local/bin/gw_detect
echo 'fi' >> /usr/local/bin/gw_detect
echo 'done < /var/log/g_gwl.txt' >> /usr/local/bin/gw_detect
chmod +x /usr/local/bin/gw_detect

echo '#!/bin/bash' > /usr/local/bin/gw_detect80
echo 'echo -n > /var/log/g_gateway.txt' >> /usr/local/bin/gw_detect80
echo "mgmt_cli -r true show gateways-and-servers details-level full --format json | $CPDIR/jq/jq -r '.objects[] | select(.type | contains(\"Member\",\"simple-gateway\")) | .\"ipv4-address\"' |grep -v null|grep -v 0.0. > /var/log/g_gwl.txt" >> /usr/local/bin/gw_detect80
echo 'while read line' >> /usr/local/bin/gw_detect80
echo 'do' >> /usr/local/bin/gw_detect80
echo 'if $CPDIR/bin/cprid_util getarch -server $line |grep "gaia" > /dev/null;' >> /usr/local/bin/gw_detect80
echo 'then' >> /usr/local/bin/gw_detect80
echo 'echo "--------- GAIA $line "' >> /usr/local/bin/gw_detect80
echo 'echo "$line" >> /var/log/g_gateway.txt' >> /usr/local/bin/gw_detect80
echo 'else' >> /usr/local/bin/gw_detect80
echo 'echo "--------- STOP no SIC to gateway or no compatible gateway"' >> /usr/local/bin/gw_detect80
echo 'fi' >> /usr/local/bin/gw_detect80
echo 'done < /var/log/g_gwl.txt' >> /usr/local/bin/gw_detect80
chmod +x /usr/local/bin/gw_detect80

More "Easy Tools":

- Easy Backup Tool - (migrate export + all GAIA configs)                   -> Easy backup of all gateway GAIA configs + migrate export with one CLI command.
- Easy execute CLI commands on all gateways simultaneously        ->  Now you can use the new command to execute bash or clish commands on all gateway simultaneously.
- Easy execute CLI commands from management on gateways        -> Easy execute CLI commands from management on gateways
- Mobile User License Tool - replaced "dtps lic"                                   -> It displays all Secure Client, SSL VPN and Mobile Access Portal licenses in total (sum) on the SMS.
- Easy View Tool - (system infos from all gateways simultaneously) -> This toll shows you quickly an overview of status information of all your gateways with only one CLI command.

Versions:
v0.1 - 04-14-2019 - gw_multi_commands_v0.1.sh -> beta
v0.2 - 04-16-2019 - gw_multi_commands_v0.2.sh -> remove bugs
v0.3 - 04-17-2019 - gw_multi_commands_v0.3.sh -> split to two commands (gw_detect and the old commands)
v0.4 - 05-05-2019 - gw_multi_commands_v0.4.sh -> add command "gw_detect80"

Video tutorial:

command on all gateways gw_m.mp4 Video Player is loading. Play Video Play Mute Current Time 0:00 / Duration 0:00 Loaded: 0% 0:00 Stream Type LIVE Seek to live, currently behind liveLIVE Remaining Time -0:00 1x Playback Rate Chapters Chapters Descriptions descriptions off, selected Captions captions settings, opens captions settings dialog captions off, selected Audio Track Picture-in-PictureFullscreen This is a modal window. Beginning of dialog window. Escape will cancel and close the window. Text ColorWhiteBlackRedGreenBlueYellowMagentaCyanTransparencyOpaqueSemi-Transparent Background ColorBlackWhiteRedGreenBlueYellowMagentaCyanTransparencyOpaqueSemi-TransparentTransparent Window ColorBlackWhiteRedGreenBlueYellowMagentaCyanTransparencyTransparentSemi-TransparentOpaque Font Size 50%75%100%125%150%175%200%300%400% Text Edge Style NoneRaisedDepressedUniformDropshadow Font Family Proportional Sans-SerifMonospace Sans-SerifProportional SerifMonospace SerifCasualScriptSmall Caps Reset restore all settings to the default valuesDone Close Modal Dialog End of dialog window. Close Modal Dialog This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

Copyright by Heiko Ankenbrand 1996-2019

[Maria_Pologova]

It does, we discussed it a few posts above. 🙂

[marko2921]

Hi @HeikoAnkenbrand,

I run at one issue runing the gw_mclish +command on SMB.

First I edited this line in gw_mclish: if $CPDIR/bin/cprid_util getarch -server $line |grep -i "gaia" > /dev/null; (added -i for grep option, without -i it didn't work)

When I try to execute command "add user test123 type admin password 1234 permission RW" with gw_mclish on SMB r80.20 device from SMS r81.10 there is this error:

Unexpected error: attempt to index global 'cgilua' (a nil value).

Here are the steps which I did in order to find out what is going wrong: 

1. Then I tried simple show commands, which works perfectly

2. Then I tried to add user and got mentioned error

3. I troubleshooted the error and I found out that problem is with next line:$CPDIR/bin/cprid_util -server $line -verbose rexec -rcmd /bin/clish -f /var/log/g_command.txt

4. I tried next variations of cprid_util: 

$CPDIR/bin/cprid_util -server ipaddress -verbose rexec -rcmd /bin/clish -c "add user test123 type admin password 1234 permission RW" (even if I try with hashed password situation is the same)

$CPDIR/bin/cprid_util -server ipaddress -verbose rexec -rcmd /bin/clish -f /var/log/g_command.txt  (in g_command.txt is command: add user test123 type admin password 1234 permission RW)

Adding user is working fine when I try it on gw with r81.10. 

So I assume that problem is with cprid_util command...

Do you have any clue how to overcome this issue, if that is possible?

Thanks a lot in advance!

[Fernando_Lopez]

hi Heiko!

Loved your script; really useful.

Is there any way you could add a real-time read for the command's output?

Say I ran a CPinfo; is there a possibility to read from stdout in real time so i can watch live what the command is doing over the GWs?

That would be awesome

Thanks!

[Fernando_Lopez]

Oh, and 2 more things, if I may ask:

1. Could there be a way to pipe or send stdout to file inside the GW?

if, say, i run "gw_mclish show configuration > config.txt", the file config.txt is created in the current mgmt dir.

2. is there a way for the gw_m commands to understand bash variables?
E.G.: $USER variable
it would be really awesome if i could just do "gw_mbash cd /home/$USER/" 

Thats about it, thank you!!

[sidlab1584]

Hi HeikoAnkenbrand,

Pretty handy script !. I want to use this to change admin passwords and expert passwords across all gateways , when I try to run this I cannot input any values , any suggestions if I can use this script for this use-case?.