Re: Easy Backup Tool - (migrate export + all GAIA... - Page 2

HeikoAnkenbrand

asy Backup Tool

Features

This tool creates a backup of all GAIA gateway configurations with one CLI command "ebackup":

- Only one CLI command "ebackup"
- Backup of all Gaia gateway configurations (Check Point appliances, Open Server, SMB appliances 11xx, 14xx)
- Migrate export on SMS
- Migrate-server on MDS
- Backup all files to one TGZ file
- FTP upload support backup file
- CP upload support for backup file via cprid_util

- MDS > All CMA's are read out and their gateways backuped.
- SMS > All gateways are read out and backuped.

Note:
- Tested with R80.10, R80.20 and R80.30.
- If the tool is started on a MDS, a mdsstop and mdsstart is performed during the migrate_server export.

CLI Parameter

Syntax	Description
-s	The option -s performs a cpstop and cpstart when the migrate export tool is executed.
-v	The option -v shows the gateway OS, JHF, Kernel, Type of all gateways.
-l	The option -l shows all ebackup tgz files in /var/log/.
-d	The option -d delete all ebackup tgz files in /var/log/.
-no_migrate / -n	The option -no_migrate has the consequence that no migrate export is executed.
-port <sms port> / -p <sms port>	The option -port <sms port> add the management server port, if it's not running on port 443.
-ftpserver <ftp server ip> -ftpuser <username> -ftppw <password>	The ftp options allow to upload the tar file to a ftp server.
- cpupload <cp_system_ip>	The option -cpupload performs a backup upload to a other Check Point gateway or SMS via cprid_util.

Example

# ebackup                    -> Backup all GAIA configs from all gateways + migrate export with locale backup file (/var/log/[date]_ebackup.tgz)
# ebackup -s                     -> Backup all GAIA configs from all gateway + migrate export with cpstop and cpstart for migrate export
# ebackup -no_migrate                                                                         -> Backup all GAIA configs from all gateway without migrate export
# ebackup -ftpserver 1.1.1.1 -ftpuser username -ftppw test123   -> Backup all GAIA configs from all gateway + migrate export with ftp upload

# ebackup -cpupload 1.1.1.1 -> Backup all GAIA configs from all gateway + migrate export with cp upload via cprid_util

Install Tool

Use this auto installer script from "Spoiler" on the SMS or MDS as CLI command in expert mode:

Click to Expand

curl_cli -k http://www.ankenbrand24.de/inst_ebackup > /tmp/inst_ebackup && chmod 770 /tmp/inst_ebackup && /tmp/inst_ebackup

curl_cli -k http://www.ankenbrand24.de/inst_ebackup > /tmp/inst_ebackup && chmod 770 /tmp/inst_ebackup && /tmp/inst_ebackup

Or "copy and past" the following script block from "Spoiler" to your SMS or MDS (in expert mode):

Click to Expand

cat <<EOT > /usr/bin/ebackup
#!/bin/bash
#
# Script Author  : Heiko Ankenbrand
# Script Website : https://www.ankenbrand24.de
# Script Source  : https://www.ankenbrand24.de/inst_ebackup
# License        : GNU General Public License (GPL)
#
if [[ -e /etc/profile.d/CP.sh ]]; then source /etc/profile.d/CP.sh; else echo "Unsupported Environment"; exit 1; fi
if [[ -e /etc/profile.d/vsenv.sh ]]; then source /etc/profile.d/vsenv.sh; fi
FILE_PATH="/var/log/ebackup";
mkdir \$FILE_PATH > /dev/null 2>&1;
rm /tmp/ebackup_topo > /dev/null 2>&1;
rm /tmp/ebackup_MGTIP > /dev/null 2>&1;
# rm /usr/local/bin/ebackup > /dev/null 2>&1;
rm /tmp/ebackup_mdsstatus > /dev/null 2>&1;
rm /tmp/ebackup_login > /dev/null 2>&1;
rm /tmp/ebachup_cpupload /dev/null 2>&1;
REMOTE_RM="\$FILE_PATH/202*";
rm \$REMOTE_RM > /dev/null 2>&1;
NOW=\$(date +"%Y_%m_%d_%H%M");
clear;
echo -e "\e[7m";
printf '%.s-' {1..78};echo;
echo '- Easy Backup Tool v3.0                    - Copyright Heiko Ankenbrand 2023 -';
printf '%.s-' {1..78};
echo -e "\e[0m"
SHOW_SUM="0";
MIGRATE="1";
MGPORT="443";
FTPSERVER="";
FTPPW="non";
FTPUSER="anonymous";
serv_value="99";
REMOTE_INFO_V="0";
RVER=`fwm ver | awk '{print \$8}'`;

mSITIONAL=()
while [[ \$# -gt 0 ]]
do
key="\$1"
case \$key in
    -h|--help|-\?)
       shift;
       echo;echo 'Help: ';echo;
       echo "-l, --list                 The option -l  shows all ebackup tgz files in /var/log/.";
       echo "-d, --delete               The option -d  delete all ebackup tgz files in /var/log/.";
       echo "-s, --stop                 The option -s  performs a cpstop and cpstart when the migrate export tool is executed.";
       echo "-n, --no_migrate           The option -n  has the consequence that no migrate export/ migrate_server is executed.";
       echo "-v, --version              The option -v  shows the gateway OS, JHF, Kernel, Type";
       echo "-u, --user                 The option -u  shows the conneted users on the SMS";
       echo "-p <port>, -port <port>    The option -p  <port> add the management server port, if it's not running on port 443.";
       echo "-ftpserver <ftp server ip> The ftp options allow to upload the tar file to a ftp server.";
       echo "-ftpuser <username> ";
       echo "-ftppw <password>";
       echo "-cpupload <cp system ip>   The option -cpupload performs a backup upload to a other Check Point gateway or SMS via cprid_util.";
       echo "";
       echo "Examples:";
       echo "ebackup -s -ftpserver 192.168.1.1 -ftpuser test -ftppw secret -> backup all gateways + migrate export + cpstop + ftp upload";
       echo "ebackup -s -cpupload  192.168.1.1                             -> backup all gateways + migrate export + cpstop+ ";
       echo "                                                                 backup of the tgz file to another gateway or SMS";
       echo "ebackup -n                                                    -> backup all gateways + without migrate export";
       echo;printf '%.s-' {1..78};echo;
       SHOW_SUM="0";
       exit 1;
    ;;
    -s|--stop)
       shift;
       SHOW_SUM="1";
    ;;
    -v|--version)
       shift;
       SHOW_SUM="1";
       REMOTE_INFO_V="1";
    ;;
    -u|--user)
       shift;
       SHOW_SUM="1";
       echo; cpstat mg |grep -e '|\|-' | cat; echo;
       exit 1;
    ;;
    -d|--delete)
       shift;
       SHOW_SUM="1";
       echo; echo "Delete all ebackup tgz files.";echo;
       rm /var/log/202* > /dev/null 2>&1;
       exit 1;
    ;;
    -l|--list)
       shift;
       SHOW_SUM="1";
       echo;echo -e "File \t\t\t\t\tBytes";
       printf '%.s-' {1..78};
       echo; ls -la /var/log/202* 2>&1| grep -v access|  awk '{print \$9 "\t\t" \$5}' |sed 's/\/var\/log\///'; echo;
       exit 1;
    ;;
    -port|-p)
       MGPORT="\$2";
       shift;
       shift;
       SHOW_SUM="0";
    ;;
    -ftpserver)
       FTPSERVER="\$2";
       shift;
       shift;
       SHOW_SUM="0";
    ;;
    -ftpuser)
       FTPUSER="\$2";
       shift;
       shift;
       SHOW_SUM="0";
    ;;
    -ftppw)
       FTPPW="\$2";
       shift;
       shift;
       SHOW_SUM="0";
    ;;
     -cpupload)
       CPUPLOAD="\$2";
       shift;
       shift;
       SHOW_SUM="0";
    ;;
    --no_migrate|-no_migrate|-n)
       shift;
       SHOW_SUM="0";
       MIGRATE="0";
    ;;

    *)    # unknown option
    #echo "unknown"
    POSITIONAL+=("\$1") # save it in an array for later
    shift # past argument
    SHOW_SUM="1";
    ;;
esac
done

############ Check MDS and SMS     #########
echo;

if [ "X\$MDSDIR" != "X" ]; then
     MDSSTATUS_HA=\$(mdsstat | grep -m 1 MDS | awk '{print \$8}');
     if [ \$MDSSTATUS_HA = "up"  ]; then
           mgmt_cli -r --port \$MGPORT true show version 2>&1> /tmp/ebackup_login;
           if grep -q Gaia /tmp/ebackup_login; then
               echo -n "The MDS is running in version "\$RVER;echo ".";echo;
               serv_value="1";
           else
               echo "The MDS is running but a connect to management API isn't possible.";echo;
               exit 1;
           fi
     else
         echo -n "MDS is not running. (Status > "\$MDSSTATUS_HA;echo ")";echo;
         exit 1;
     fi
else
     #Check SMS
     CPM_PID=\$(ps -efww | grep java | grep cpm.Cpm | awk '{print \$2}');
     if [ -z \$CPM_PID ]; then
           echo "The SMS is not running.";echo;
     exit 1;
     else
           mgmt_cli -r --port \$MGPORT true show version 2>&1> /tmp/ebackup_login;
           if grep -q Gaia /tmp/ebackup_login; then
               echo -n "The SMS is running in version "\$RVER;echo ".";echo;
               serv_value="0";
           else
               echo "The SMS is running but a connect to management API isn't possible.";echo;
               exit 1;
           fi
     fi
fi
if [ \$serv_value -eq 1  ]; then
   mdsenv > /dev/null 2>&1;
   mdsstat | grep CMA | awk '{print \$6}' >> /tmp/ebackup_MGTIP
   mdsstat | grep MDS | awk '{print \$6}' >> /tmp/ebackup_MDSIP
fi
############ Read gateways     #########
if  [ \$serv_value -gt 0  ]; then
       echo "Read gateways from CMA: ";echo;
       while read -r hostip;
       do
           CMASTATUS_HA=\$(mdsstat | grep CMA| grep \$hostip | awk '{print \$8}');
           CMANAME_HA=\$(mdsstat | grep CMA| grep \$hostip | awk '{print \$4}');
           if [ \$CMASTATUS_HA = "up"  ]; then
               echo "   OK     - "\$CMANAME_HA;
               CMACOUNT=\$(mgmt_cli -r --port \$MGPORT true -d \$hostip show gateways-and-servers offset 0 limit 500 details-level full --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway")) | ."ipv4-address",."name"  ' |xargs -n 2| grep -c ".");
               if [ \$CMACOUNT != 0 ]; then
                     mgmt_cli -r --port \$MGPORT true -d \$hostip show gateways-and-servers offset 0 limit 500 details-level full --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway","CpmiClusterMember", "cluster-member")) | ."ipv4-address",."name"  ' |xargs -n 2 | grep -v 0.0.0.  | sed -e "s/\$/ \$hostip/"  >> /tmp/ebackup_topo;
               fi
           else
               echo " Failed   - "\$CMANAME_HA;
           fi
       done < /tmp/ebackup_MGTIP
       echo;
else
     # read SMS gateways
     mgmt_cli -r --port \$MGPORT true show gateways-and-servers details-level full limit 500 offset 0 --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway","CpmiClusterMember", "cluster-member")) | ."ipv4-address",."name"  ' |xargs -n 2 | grep -v 0.0.0. |grep -v null | sed -e "s/\$/ x.x.x.x/" 2>&1> /tmp/ebackup_topo;
fi
######## GAIA Config save all gateways   #########
if [ ! -f /tmp/ebackup_topo ]; then
   echo "No gateways found!";
else
   echo "clish -c 'show configuration' > /var/log/g_output.txt" > /tmp/g_command.txt;
   echo "Backup GAIA config gateways:";echo;
   while read -r REMOTE_IP REMOTE_NAME REMOTE_CMA;
     do
     REMOTE_FILE="\$NOW-\$REMOTE_NAME";
     REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE";
     mdsenv \$REMOTE_CMA > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$REMOTE_IP putfile -local_file /tmp/g_command.txt -remote_file /var/log/g_command.txt > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$REMOTE_IP -verbose rexec -rcmd /bin/bash -f /var/log/g_command.txt > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$REMOTE_IP getfile -remote_file /var/log/g_output.txt -local_file \$REMOTE_DATEI > /dev/null 2>&1;
     #echo -n "";
     if [ ! -f \$REMOTE_DATEI ]; then
       echo -n " Failed   - ";
       else
       if grep -q hostname \$REMOTE_DATEI; then
          echo -n "   OK     - ";
          if [ \$REMOTE_INFO_V == "1" ] ; then
            $CPDIR/bin/cprid_util -server \$REMOTE_IP putfile -local_file /usr/bin/ebackup_command -remote_file /var/log/ebackup_command.txt > /dev/null 2>&1;
            $CPDIR/bin/cprid_util -server \$REMOTE_IP -verbose rexec -rcmd /bin/bash -f /var/log/ebackup_command.txt > /dev/null 2>&1;
            $CPDIR/bin/cprid_util -server \$REMOTE_IP getfile -remote_file /var/log/g_output1.txt -local_file /tmp/ebackup_gateway_info.txt > /dev/null 2>&1;
          fi
       else
          echo -n " Failed   - ";
       fi
     fi
     echo -n \$REMOTE_NAME;
     echo -n "   ";
     if [ \$REMOTE_INFO_V == "1" ] ; then
        if [ -f /tmp/ebackup_gateway_info.txt ]; then
           REMOTE_INFO=\$(cat /tmp/ebackup_gateway_info.txt);
           echo; echo -n "           " \$REMOTE_INFO;
           rm /tmp/ebackup_gateway_info.txt;
           else
           echo; echo -n "            (no gateway information available)";
        fi
     fi
     if [ \$serv_value -eq 1  ]; then
        CMANAME_HA=\$(mdsstat | grep \$REMOTE_CMA | awk '{print \$4}');
        echo;    echo -n "            (CMA: "\$CMANAME_HA;echo -n ")";
     fi
     echo;
    done < /tmp/ebackup_topo;
fi
echo;
######## GAIA config management save     #########
echo "Backup GAIA config Management:";echo;
REMOTE_FILE="\$NOW-Management";
REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE";
clish -c 'show configuration' > \$REMOTE_DATEI;
     if [ ! -f \$REMOTE_DATEI ]; then
       echo -n "  Failed - ";
       else
       if grep -q hostname \$REMOTE_DATEI; then
          echo -n "   OK     - ";
       else
          echo -n " Failed   - "
       fi
     fi
     echo -n "Management   ";
     /usr/bin/ebackup_command;
     if [ \$REMOTE_INFO_V == "1" ] ; then
        if [ -f /var/log/g_output1.txt ]; then
           REMOTE_INFO=\$(cat /var/log/g_output1.txt);
           echo; echo -n "           " \$REMOTE_INFO;
           rm /var/log/g_output1.txt;
        fi
     fi
     echo;echo;

############## SMS ############################
# SMS migrate export
if [ \$serv_value -eq 0  ]; then
  if [ \$MIGRATE == "1" ] ; then
    REMOTE_FILE="\$NOW-SMS-Migrate-Export";
    REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE";
    echo;echo "Migrate Export SMS:";echo;
    if [ \$SHOW_SUM == "1" ] ;
      then
        cpstop > /dev/null 2>&1;
        echo "   OK     - cpstop";
    fi
    REMOTE_DATEI_CHK="\$REMOTE_DATEI.tgz";

    $FWDIR/bin/upgrade_tools/migrate export -n \$REMOTE_DATEI 2>&1> \tmp\ebackup_migrate ;
       if [ ! -f \$REMOTE_DATEI_CHK ]; then
           echo " Failed   - SMS migrate export";
       else
           echo "   OK     - SMS migrate export";
       fi

    if [ \$SHOW_SUM == "1" ] ;
      then
        cpstart > /dev/null 2>&1;
        echo "   OK     - cpstart";
    fi
  fi
fi
############## MDS ############################
if [ \$MIGRATE == "1" ] ; then
 if  [ \$serv_value -gt 0  ]; then
   VER=`fwm ver | awk '{print \$8}' | sed 's/R80.//g'`
   if [ \$VER -lt 30  ]; then
        ### MDS version R80, R80.10, R80.20 migrate export
        REMOTE_FILE="\$NOW-MDS-Migrate-Export";
        REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE";
        mds/tmp/ebackup_migrateenv > /dev/null 2>&1
        echo -n "MDS migrate export (migrate export) "\$RVER;echo ":";echo;
        if [ \$SHOW_SUM == "1" ] ;then
           mdsstop > /dev/null 2>&1;
           echo "   OK     - MDS mdsstop";
        fi
        \$MDS_FWDIR/bin/upgrade_tools/migrate export -n \$REMOTE_DATEI 2>&1> /tmp/ebackup_migrate ;
        if [ ! -f \$REMOTE_DATEI_CHK ]; then
           echo " Failed   - MDS R80, R80.10, R80.20 (migrate export)";
        else
           echo "   OK     - MDS R80, R80.10, R80.20 (migrate export)";
        fi
        if [ \$SHOW_SUM == "1" ] ;then
           mdsstart > /dev/null 2>&1;
           echo "   OK     - MDS mdsstart";
        fi
   else
        ### MDS version R80.30+ migrate_server
        REMOTE_FILE="\$NOW-MDS-Migrate-Server";
        REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE";
        mdsenv > /dev/null 2>&1;
        echo;echo -n "MDS migrate server (migrate_server) "\$RVER;echo ":";echo;
        \$MDS_FWDIR/scripts/migrate_server export -skip_upgrade_tools_check -n -v \$RVER \$REMOTE_DATEI 2>&1> /tmp/ebackup_migrate ;

            if grep -q "sk135172" /tmp/ebackup_migrate; then
                echo " Failed   - MDS R80.30+ migrate_server export (No upgrade tools package is installed refer to sk135172)";
            else
                if [ ! -f \$REMOTE_DATEI ]; then
                    echo " Failed   - MDS R80.30+ migrate_server export";
                else
                    echo "   OK     - MDS R80.30+ migrate_server export";
                fi
            fi
   fi
 fi
fi
############## TAR ############################
echo;echo "Tar file location:";echo;
REMOTE_FILE="\$NOW-ebackup";
REMOTE_DATEI="/var/log/\$REMOTE_FILE.tgz";
REMOTE_TAR="\$FILE_PATH";
# echo \$REMOTE_TAR
# echo \$REMOTE_DATEI

tar -czf \$REMOTE_DATEI \$REMOTE_TAR> /dev/null 2>&1;

     if [ ! -f \$REMOTE_DATEI ]; then
            echo " Failed   - tar file";
       else
          echo -n "   OK     - tar file (" ;
          echo -n \$REMOTE_DATEI;
          echo ")";
     fi
echo;
############## FTP ############################
if [ "X\$FTPSERVER" != "X" ]; then

   FTPDATEI="\$REMOTE_FILE.tgz";
   echo;echo "FTP upload:";echo;
   echo "
   verbose
   user \$FTPUSER \$FTPPW
   bin
   lcd /var/log
   put \$FTPDATEI
   bye
   " | /usr/bin/ftp -in \$FTPSERVER > /tmp/ebackup_ftp 2>&1;
   if grep -q 226 /tmp/ebackup_ftp; then
       echo "   OK     - FTP upload";
   else
       echo " Failed   - FTP upload (Log: /tmp/ebackup_ftp)";
   fi
   echo;
fi

############## CPUPLOAD ############################
if [ "X\$CPUPLOAD" != "X" ]; then


     #REMOTE_FILE="\$NOW-\$REMOTE_NAME";
     #REMOTE_DATEI1="\$FILE_PATH/\$REMOTE_FILE";
     CPUPLOADDATEI="\$REMOTE_DATEI";
     echo "CP upload to \$CPUPLOAD:";echo;
     echo "ls \$CPUPLOADDATEI > /var/log/g_output.txt" > /tmp/g_command.txt;
     $CPDIR/bin/cprid_util -server \$CPUPLOAD putfile -local_file /tmp/g_command.txt -remote_file /var/log/g_command.txt > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$CPUPLOAD putfile -local_file \$CPUPLOADDATEI -remote_file \$CPUPLOADDATEI  > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$CPUPLOAD -verbose rexec -rcmd /bin/bash -f /var/log/g_command.txt > /dev/null 2>&1;
     $CPDIR/bin/cprid_util -server \$CPUPLOAD getfile -remote_file /var/log/g_output.txt -local_file /tmp/ebachup_cpupload > /dev/null 2>&1;
     if [ ! -f /tmp/ebachup_cpupload ]; then
       echo " Failed   - CP upload to \$CPUPLOAD ";
       else
       if grep -q tgz /tmp/ebachup_cpupload; then
          echo "   OK     - CP upload file (\$CPUPLOADDATEI)";

       else
          echo " Failed   - CP upload to \$CPUPLOAD";
       fi
     fi
     echo;
fi



REMOTE_RM="\$FILE_PATH/202*";
rm \$REMOTE_RM > /dev/null 2>&1;
rm /tmp/g_command.txt > /dev/null 2>&1;
rm /tmp/ebackup_topo > /dev/null 2>&1;
rm /tmp/ebachup_cpupload > /dev/null 2>&1;
rm /tmp/ebackup_MGTIP > /dev/null 2>&1;
rm /tmp/ebackup_migrate > /dev/null 2>&1;
rm /tmp/ebackup_mdsstatus > /dev/null 2>&1;
rm /tmp/ebackup_login > /dev/null 2>&1;
EOT
cat <<EHA > /usr/bin/ebackup_command
#!/bin/bash
J=\`cpinfo -y all 2>/dev/null | grep JUMBO | tail -n1 | awk '{print \$3}'\`;
O=\`cat /etc/cp-release | cut -c 13- | sed 's/^ *//g' | sed 's/\s*$//g'\`;
OSM=\`uname -a | grep -c x86_64\`; [ \$OSM == 0 ] && { OSM=32; } || { OSM=64; };
K=\`uname -r | sed 's/\([0-9]\+\.[0-9]\+\)\..*/\1/'\`;
T=\`cpstat os | grep "Appliance Name" | tr -s ' ' | cut -c 17- \`;
echo "(\${O}, Kernel \${K}, \${OSM} Bit, JHF \${J}, \${T})" > /var/log/g_output1.txt ;
EHA
chmod 770 /usr/bin/ebackup;
chmod 770 /usr/bin/ebackup_command;

cat <<EOT > /usr/bin/ebackup #!/bin/bash # # Script Author : Heiko Ankenbrand # Script Website : https://www.ankenbrand24.de # Script Source : https://www.ankenbrand24.de/inst_ebackup # License : GNU General Public License (GPL) # if [[ -e /etc/profile.d/CP.sh ]]; then source /etc/profile.d/CP.sh; else echo "Unsupported Environment"; exit 1; fi if [[ -e /etc/profile.d/vsenv.sh ]]; then source /etc/profile.d/vsenv.sh; fi FILE_PATH="/var/log/ebackup"; mkdir \$FILE_PATH > /dev/null 2>&1; rm /tmp/ebackup_topo > /dev/null 2>&1; rm /tmp/ebackup_MGTIP > /dev/null 2>&1; # rm /usr/local/bin/ebackup > /dev/null 2>&1; rm /tmp/ebackup_mdsstatus > /dev/null 2>&1; rm /tmp/ebackup_login > /dev/null 2>&1; rm /tmp/ebachup_cpupload /dev/null 2>&1; REMOTE_RM="\$FILE_PATH/202*"; rm \$REMOTE_RM > /dev/null 2>&1; NOW=\$(date +"%Y_%m_%d_%H%M"); clear; echo -e "\e[7m"; printf '%.s-' {1..78};echo; echo '- Easy Backup Tool v3.0 - Copyright Heiko Ankenbrand 2023 -'; printf '%.s-' {1..78}; echo -e "\e[0m" SHOW_SUM="0"; MIGRATE="1"; MGPORT="443"; FTPSERVER=""; FTPPW="non"; FTPUSER="anonymous"; serv_value="99"; REMOTE_INFO_V="0"; RVER=`fwm ver | awk '{print \$8}'`; mSITIONAL=() while [[ \$# -gt 0 ]] do key="\$1" case \$key in -h|--help|-\?) shift; echo;echo 'Help: ';echo; echo "-l, --list The option -l shows all ebackup tgz files in /var/log/."; echo "-d, --delete The option -d delete all ebackup tgz files in /var/log/."; echo "-s, --stop The option -s performs a cpstop and cpstart when the migrate export tool is executed."; echo "-n, --no_migrate The option -n has the consequence that no migrate export/ migrate_server is executed."; echo "-v, --version The option -v shows the gateway OS, JHF, Kernel, Type"; echo "-u, --user The option -u shows the conneted users on the SMS"; echo "-p <port>, -port <port> The option -p <port> add the management server port, if it's not running on port 443."; echo "-ftpserver <ftp server ip> The ftp options allow to upload the tar file to a ftp server."; echo "-ftpuser <username> "; echo "-ftppw <password>"; echo "-cpupload <cp system ip> The option -cpupload performs a backup upload to a other Check Point gateway or SMS via cprid_util."; echo ""; echo "Examples:"; echo "ebackup -s -ftpserver 192.168.1.1 -ftpuser test -ftppw secret -> backup all gateways + migrate export + cpstop + ftp upload"; echo "ebackup -s -cpupload 192.168.1.1 -> backup all gateways + migrate export + cpstop+ "; echo " backup of the tgz file to another gateway or SMS"; echo "ebackup -n -> backup all gateways + without migrate export"; echo;printf '%.s-' {1..78};echo; SHOW_SUM="0"; exit 1; ;; -s|--stop) shift; SHOW_SUM="1"; ;; -v|--version) shift; SHOW_SUM="1"; REMOTE_INFO_V="1"; ;; -u|--user) shift; SHOW_SUM="1"; echo; cpstat mg |grep -e '|\|-' | cat; echo; exit 1; ;; -d|--delete) shift; SHOW_SUM="1"; echo; echo "Delete all ebackup tgz files.";echo; rm /var/log/202* > /dev/null 2>&1; exit 1; ;; -l|--list) shift; SHOW_SUM="1"; echo;echo -e "File \t\t\t\t\tBytes"; printf '%.s-' {1..78}; echo; ls -la /var/log/202* 2>&1| grep -v access| awk '{print \$9 "\t\t" \$5}' |sed 's/\/var\/log\///'; echo; exit 1; ;; -port|-p) MGPORT="\$2"; shift; shift; SHOW_SUM="0"; ;; -ftpserver) FTPSERVER="\$2"; shift; shift; SHOW_SUM="0"; ;; -ftpuser) FTPUSER="\$2"; shift; shift; SHOW_SUM="0"; ;; -ftppw) FTPPW="\$2"; shift; shift; SHOW_SUM="0"; ;; -cpupload) CPUPLOAD="\$2"; shift; shift; SHOW_SUM="0"; ;; --no_migrate|-no_migrate|-n) shift; SHOW_SUM="0"; MIGRATE="0"; ;; *) # unknown option #echo "unknown" POSITIONAL+=("\$1") # save it in an array for later shift # past argument SHOW_SUM="1"; ;; esac done ############ Check MDS and SMS ######### echo; if [ "X\$MDSDIR" != "X" ]; then MDSSTATUS_HA=\$(mdsstat | grep -m 1 MDS | awk '{print \$8}'); if [ \$MDSSTATUS_HA = "up" ]; then mgmt_cli -r --port \$MGPORT true show version 2>&1> /tmp/ebackup_login; if grep -q Gaia /tmp/ebackup_login; then echo -n "The MDS is running in version "\$RVER;echo ".";echo; serv_value="1"; else echo "The MDS is running but a connect to management API isn't possible.";echo; exit 1; fi else echo -n "MDS is not running. (Status > "\$MDSSTATUS_HA;echo ")";echo; exit 1; fi else #Check SMS CPM_PID=\$(ps -efww | grep java | grep cpm.Cpm | awk '{print \$2}'); if [ -z \$CPM_PID ]; then echo "The SMS is not running.";echo; exit 1; else mgmt_cli -r --port \$MGPORT true show version 2>&1> /tmp/ebackup_login; if grep -q Gaia /tmp/ebackup_login; then echo -n "The SMS is running in version "\$RVER;echo ".";echo; serv_value="0"; else echo "The SMS is running but a connect to management API isn't possible.";echo; exit 1; fi fi fi if [ \$serv_value -eq 1 ]; then mdsenv > /dev/null 2>&1; mdsstat | grep CMA | awk '{print \$6}' >> /tmp/ebackup_MGTIP mdsstat | grep MDS | awk '{print \$6}' >> /tmp/ebackup_MDSIP fi ############ Read gateways ######### if [ \$serv_value -gt 0 ]; then echo "Read gateways from CMA: ";echo; while read -r hostip; do CMASTATUS_HA=\$(mdsstat | grep CMA| grep \$hostip | awk '{print \$8}'); CMANAME_HA=\$(mdsstat | grep CMA| grep \$hostip | awk '{print \$4}'); if [ \$CMASTATUS_HA = "up" ]; then echo " OK - "\$CMANAME_HA; CMACOUNT=\$(mgmt_cli -r --port \$MGPORT true -d \$hostip show gateways-and-servers offset 0 limit 500 details-level full --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway")) | ."ipv4-address",."name" ' |xargs -n 2| grep -c "."); if [ \$CMACOUNT != 0 ]; then mgmt_cli -r --port \$MGPORT true -d \$hostip show gateways-and-servers offset 0 limit 500 details-level full --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway","CpmiClusterMember", "cluster-member")) | ."ipv4-address",."name" ' |xargs -n 2 | grep -v 0.0.0. | sed -e "s/\$/ \$hostip/" >> /tmp/ebackup_topo; fi else echo " Failed - "\$CMANAME_HA; fi done < /tmp/ebackup_MGTIP echo; else # read SMS gateways mgmt_cli -r --port \$MGPORT true show gateways-and-servers details-level full limit 500 offset 0 --format json | \$CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway","CpmiClusterMember", "cluster-member")) | ."ipv4-address",."name" ' |xargs -n 2 | grep -v 0.0.0. |grep -v null | sed -e "s/\$/ x.x.x.x/" 2>&1> /tmp/ebackup_topo; fi ######## GAIA Config save all gateways ######### if [ ! -f /tmp/ebackup_topo ]; then echo "No gateways found!"; else echo "clish -c 'show configuration' > /var/log/g_output.txt" > /tmp/g_command.txt; echo "Backup GAIA config gateways:";echo; while read -r REMOTE_IP REMOTE_NAME REMOTE_CMA; do REMOTE_FILE="\$NOW-\$REMOTE_NAME"; REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE"; mdsenv \$REMOTE_CMA > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$REMOTE_IP putfile -local_file /tmp/g_command.txt -remote_file /var/log/g_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$REMOTE_IP -verbose rexec -rcmd /bin/bash -f /var/log/g_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$REMOTE_IP getfile -remote_file /var/log/g_output.txt -local_file \$REMOTE_DATEI > /dev/null 2>&1; #echo -n ""; if [ ! -f \$REMOTE_DATEI ]; then echo -n " Failed - "; else if grep -q hostname \$REMOTE_DATEI; then echo -n " OK - "; if [ \$REMOTE_INFO_V == "1" ] ; then $CPDIR/bin/cprid_util -server \$REMOTE_IP putfile -local_file /usr/bin/ebackup_command -remote_file /var/log/ebackup_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$REMOTE_IP -verbose rexec -rcmd /bin/bash -f /var/log/ebackup_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$REMOTE_IP getfile -remote_file /var/log/g_output1.txt -local_file /tmp/ebackup_gateway_info.txt > /dev/null 2>&1; fi else echo -n " Failed - "; fi fi echo -n \$REMOTE_NAME; echo -n " "; if [ \$REMOTE_INFO_V == "1" ] ; then if [ -f /tmp/ebackup_gateway_info.txt ]; then REMOTE_INFO=\$(cat /tmp/ebackup_gateway_info.txt); echo; echo -n " " \$REMOTE_INFO; rm /tmp/ebackup_gateway_info.txt; else echo; echo -n " (no gateway information available)"; fi fi if [ \$serv_value -eq 1 ]; then CMANAME_HA=\$(mdsstat | grep \$REMOTE_CMA | awk '{print \$4}'); echo; echo -n " (CMA: "\$CMANAME_HA;echo -n ")"; fi echo; done < /tmp/ebackup_topo; fi echo; ######## GAIA config management save ######### echo "Backup GAIA config Management:";echo; REMOTE_FILE="\$NOW-Management"; REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE"; clish -c 'show configuration' > \$REMOTE_DATEI; if [ ! -f \$REMOTE_DATEI ]; then echo -n " Failed - "; else if grep -q hostname \$REMOTE_DATEI; then echo -n " OK - "; else echo -n " Failed - " fi fi echo -n "Management "; /usr/bin/ebackup_command; if [ \$REMOTE_INFO_V == "1" ] ; then if [ -f /var/log/g_output1.txt ]; then REMOTE_INFO=\$(cat /var/log/g_output1.txt); echo; echo -n " " \$REMOTE_INFO; rm /var/log/g_output1.txt; fi fi echo;echo; ############## SMS ############################ # SMS migrate export if [ \$serv_value -eq 0 ]; then if [ \$MIGRATE == "1" ] ; then REMOTE_FILE="\$NOW-SMS-Migrate-Export"; REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE"; echo;echo "Migrate Export SMS:";echo; if [ \$SHOW_SUM == "1" ] ; then cpstop > /dev/null 2>&1; echo " OK - cpstop"; fi REMOTE_DATEI_CHK="\$REMOTE_DATEI.tgz"; $FWDIR/bin/upgrade_tools/migrate export -n \$REMOTE_DATEI 2>&1> \tmp\ebackup_migrate ; if [ ! -f \$REMOTE_DATEI_CHK ]; then echo " Failed - SMS migrate export"; else echo " OK - SMS migrate export"; fi if [ \$SHOW_SUM == "1" ] ; then cpstart > /dev/null 2>&1; echo " OK - cpstart"; fi fi fi ############## MDS ############################ if [ \$MIGRATE == "1" ] ; then if [ \$serv_value -gt 0 ]; then VER=`fwm ver | awk '{print \$8}' | sed 's/R80.//g'` if [ \$VER -lt 30 ]; then ### MDS version R80, R80.10, R80.20 migrate export REMOTE_FILE="\$NOW-MDS-Migrate-Export"; REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE"; mds/tmp/ebackup_migrateenv > /dev/null 2>&1 echo -n "MDS migrate export (migrate export) "\$RVER;echo ":";echo; if [ \$SHOW_SUM == "1" ] ;then mdsstop > /dev/null 2>&1; echo " OK - MDS mdsstop"; fi \$MDS_FWDIR/bin/upgrade_tools/migrate export -n \$REMOTE_DATEI 2>&1> /tmp/ebackup_migrate ; if [ ! -f \$REMOTE_DATEI_CHK ]; then echo " Failed - MDS R80, R80.10, R80.20 (migrate export)"; else echo " OK - MDS R80, R80.10, R80.20 (migrate export)"; fi if [ \$SHOW_SUM == "1" ] ;then mdsstart > /dev/null 2>&1; echo " OK - MDS mdsstart"; fi else ### MDS version R80.30+ migrate_server REMOTE_FILE="\$NOW-MDS-Migrate-Server"; REMOTE_DATEI="\$FILE_PATH/\$REMOTE_FILE"; mdsenv > /dev/null 2>&1; echo;echo -n "MDS migrate server (migrate_server) "\$RVER;echo ":";echo; \$MDS_FWDIR/scripts/migrate_server export -skip_upgrade_tools_check -n -v \$RVER \$REMOTE_DATEI 2>&1> /tmp/ebackup_migrate ; if grep -q "sk135172" /tmp/ebackup_migrate; then echo " Failed - MDS R80.30+ migrate_server export (No upgrade tools package is installed refer to sk135172)"; else if [ ! -f \$REMOTE_DATEI ]; then echo " Failed - MDS R80.30+ migrate_server export"; else echo " OK - MDS R80.30+ migrate_server export"; fi fi fi fi fi ############## TAR ############################ echo;echo "Tar file location:";echo; REMOTE_FILE="\$NOW-ebackup"; REMOTE_DATEI="/var/log/\$REMOTE_FILE.tgz"; REMOTE_TAR="\$FILE_PATH"; # echo \$REMOTE_TAR # echo \$REMOTE_DATEI tar -czf \$REMOTE_DATEI \$REMOTE_TAR> /dev/null 2>&1; if [ ! -f \$REMOTE_DATEI ]; then echo " Failed - tar file"; else echo -n " OK - tar file (" ; echo -n \$REMOTE_DATEI; echo ")"; fi echo; ############## FTP ############################ if [ "X\$FTPSERVER" != "X" ]; then FTPDATEI="\$REMOTE_FILE.tgz"; echo;echo "FTP upload:";echo; echo " verbose user \$FTPUSER \$FTPPW bin lcd /var/log put \$FTPDATEI bye " | /usr/bin/ftp -in \$FTPSERVER > /tmp/ebackup_ftp 2>&1; if grep -q 226 /tmp/ebackup_ftp; then echo " OK - FTP upload"; else echo " Failed - FTP upload (Log: /tmp/ebackup_ftp)"; fi echo; fi ############## CPUPLOAD ############################ if [ "X\$CPUPLOAD" != "X" ]; then #REMOTE_FILE="\$NOW-\$REMOTE_NAME"; #REMOTE_DATEI1="\$FILE_PATH/\$REMOTE_FILE"; CPUPLOADDATEI="\$REMOTE_DATEI"; echo "CP upload to \$CPUPLOAD:";echo; echo "ls \$CPUPLOADDATEI > /var/log/g_output.txt" > /tmp/g_command.txt; $CPDIR/bin/cprid_util -server \$CPUPLOAD putfile -local_file /tmp/g_command.txt -remote_file /var/log/g_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$CPUPLOAD putfile -local_file \$CPUPLOADDATEI -remote_file \$CPUPLOADDATEI > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$CPUPLOAD -verbose rexec -rcmd /bin/bash -f /var/log/g_command.txt > /dev/null 2>&1; $CPDIR/bin/cprid_util -server \$CPUPLOAD getfile -remote_file /var/log/g_output.txt -local_file /tmp/ebachup_cpupload > /dev/null 2>&1; if [ ! -f /tmp/ebachup_cpupload ]; then echo " Failed - CP upload to \$CPUPLOAD "; else if grep -q tgz /tmp/ebachup_cpupload; then echo " OK - CP upload file (\$CPUPLOADDATEI)"; else echo " Failed - CP upload to \$CPUPLOAD"; fi fi echo; fi REMOTE_RM="\$FILE_PATH/202*"; rm \$REMOTE_RM > /dev/null 2>&1; rm /tmp/g_command.txt > /dev/null 2>&1; rm /tmp/ebackup_topo > /dev/null 2>&1; rm /tmp/ebachup_cpupload > /dev/null 2>&1; rm /tmp/ebackup_MGTIP > /dev/null 2>&1; rm /tmp/ebackup_migrate > /dev/null 2>&1; rm /tmp/ebackup_mdsstatus > /dev/null 2>&1; rm /tmp/ebackup_login > /dev/null 2>&1; EOT cat <<EHA > /usr/bin/ebackup_command #!/bin/bash J=\`cpinfo -y all 2>/dev/null | grep JUMBO | tail -n1 | awk '{print \$3}'\`; O=\`cat /etc/cp-release | cut -c 13- | sed 's/^ *//g' | sed 's/\s*$//g'\`; OSM=\`uname -a | grep -c x86_64\`; [ \$OSM == 0 ] && { OSM=32; } || { OSM=64; }; K=\`uname -r | sed 's/$[0-9]\+\.[0-9]\+$\..*/\1/'\`; T=\`cpstat os | grep "Appliance Name" | tr -s ' ' | cut -c 17- \`; echo "(\${O}, Kernel \${K}, \${OSM} Bit, JHF \${J}, \${T})" > /var/log/g_output1.txt ; EHA chmod 770 /usr/bin/ebackup; chmod 770 /usr/bin/ebackup_command;

Create Cronjob

If the ebackup tool should be executed automatically, only a cronjob has to be created.

Click to Expand

Add a user "jobuser" via GAIA web portal:

Set shell:                  /bin/bash
Set assigned role: adminRole

Set a new password:

FTP upload:

                Add a cronjob via CLI to execute ebackup at Saturday night at 10:00 pm.

                - Add parameter -s for cpstop/cpstart
                - Add ftpserver/ ftpuser and ftppw parameters for ftp upload.

                # crontab -u jobuser -e
                ------------------------------------------------------------------------------------------------------
                22 00 * * 6   /usr/bin/ebackup -s -ftpserver <server_ip> -ftpuser <username> -ftppw <password>

CP upload:

If an FTP upload is too insecure for you, you can also transfer the backup file to another Check Point system with the option -cpupload via cprid_util.

- Add parameter -s for cpstop/cpstart
- Add ftpserver/ ftpuser and ftppw parameters for ftp upload.

# crontab -u jobuser -e
------------------------------------------------------------------------------------------------------
22 00 * * 6 /usr/bin/ebackup -s -cpupload <cp_server_ip>

Add a user "jobuser" via GAIA web portal:Set shell: /bin/bashSet assigned role: adminRoleSet a new password:FTP upload: Add a cronjob via CLI to execute ebackup at Saturday night at 10:00 pm. - Add parameter -s for cpstop/cpstart - Add ftpserver/ ftpuser and ftppw parameters for ftp upload. # crontab -u jobuser -e ------------------------------------------------------------------------------------------------------ 22 00 * * 6 /usr/bin/ebackup -s -ftpserver <server_ip> -ftpuser <username> -ftppw <password>CP upload: If an FTP upload is too insecure for you, you can also transfer the backup file to another Check Point system with the option -cpupload via cprid_util.- Add parameter -s for cpstop/cpstart - Add ftpserver/ ftpuser and ftppw parameters for ftp upload.# crontab -u jobuser -e ------------------------------------------------------------------------------------------------------22 00 * * 6 /usr/bin/ebackup -s -cpupload <cp_server_ip>

More "Easy Tools"

- Easy Backup Tool - (migrate export + all GAIA configs)                   -> Easy backup of all gateway GAIA configs + migrate export with one CLI command.
- Easy execute CLI commands on all gateways simultaneously        -> Now you can use the new command to execute bash or clish commands on all gateway simultaneously.
- Easy execute CLI commands from management on gateways        -> Easy execute CLI commands from management on gateways
- Mobile User License Tool - replaced "dtps lic"                                   -> It displays all Secure Client, SSL VPN and Mobile Access Portal licenses in total (sum) on the SMS.
- Easy View Tool - (system infos from all gateways simultaneously) -> This toll shows you quickly an overview of status information of all your gateways with only one CLI command.

Version

0.1   03-15-2020   - oneliner to show backup clish configs
0.6   03-23-2020   - GA version ebackup
0.7   03-25-2020    - add parameter -s for cpstop/cpstart
0.8   03-26-2020   - add parameter -no_migrate (no migrate export)
0.9   03-26-2020   - bug fixed (special thanks to Paul_Gademsky)
1.0   03-27-2020   - bug fixed (SMS and MDS)
1.1   03-30-2020   - add option -port
1.2   03-30-2020   - bug fixed
1.3   03-31-2020   - ftp upload function (-ftpserver, -ftpuser, -ftppw)

2.0   04-04-2020   - MDS support
2.1   04-06-2020   - bug fixed
2.2   04-07-2020   - add option -v
2.3   04-09-2020   - add option -cpupload (upload tgz file to a other Check Point gateway or SMS)

3.0   06-20-2023   - Support for R81.20

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

ReinerS · ‎2020-03-26

Great work.

Christian_Wagen · ‎2020-03-27

Hi @HeikoAnkenbrand

That's a great idea and great implementation!

Keep up the good work 🙂

Daniel_ · ‎2020-03-27

Thanks for this Script.

With json and jq most often you don't need additional bash commands. So you can replace

mgmt_cli -r true show gateways-and-servers details-level full --format json | $CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway")) | ."ipv4-address",."name"  ' |xargs -n 2 | grep -v 0.0.0. > /tmp/ebackup_topo;

with

mgmt_cli -r true show gateways-and-servers details-level full --format json | $CPDIR/jq/jq -r '.objects[] | select(.type | contains("Member","simple-gateway")) | select(."ipv4-address" != "0.0.0.0") | ."ipv4-address"+" "+ ."name"' > /tmp/ebackup_topo;

Bye

Dilian_Chernev · ‎2020-03-30

Thank you for the excellent script!

I have a suggestion to add an option to change the API port.
For example on my SMS, there is also Endpoint MGMT and default API port is changed to 4434 .

HeikoAnkenbrand · ‎2020-03-30

Hi @Dilian_Chernev,

That was a good point from you. 👍

Now in v1.1 the option -port <sms port> add the management server port, if it's not running on port 443.

Regards
Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Dilian_Chernev · ‎2020-04-08

Working perfectly!
Is it possible to add file transfer to a SCP server also ?

Paul_Gademsky · ‎2020-04-08

@Dilian_Chernev @HeikoAnkenbrand

It should be fairly straight forward to do, but I'll leave that to Heiko to incorporate.

When it comes to storing the passwords for the ftp/scp/sftp on a server for a cron job, I tend to stay away from that.

My solution is to use the cprid capabilities to copy the file to a second Mgmt (HA), log server, SmartEvent server, or worse case a gateway, so that it exists in more than one location.

Just my 2 cents.

Paul G.

HeikoAnkenbrand · ‎2020-04-09

Hi@Dilian_Chernev @Paul_Gademsky,

Check Point upload support for the backup file via cprid_util is added.😀

So you can copy the backup with the option -cpupload directly to another Check Point gateway or SMS/MDS.

Regards
Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Giorgio_Giustoz · ‎2020-03-30

Thank you for the excellent script!

I have a suggestion to add an option to send the files (export & Gaia-configuration) to a external server/location, via FTP o CIFS.

HeikoAnkenbrand · ‎2020-03-30

Hi @Giorgio_Giustoz ,

Now v1.3 with FTP Upload,

# ebackup -ftpserver 1.1.1.1 -ftpuser username -ftppw test123 -> Backup all GAIA configs + migrate export with upload to a ftp server.

Regards

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Armin_Weiler · ‎2020-03-31

Hi @HeikoAnkenbrand,

I have been following this article for the last few days. This is a really good idea that you've developed here. In my opinion the script should be published in a JHF or in the next R80 version.

We use it on several management servers of our customers and it's working great now.

PS: Curl download works fine now.

Many thanks
Armin

HeikoAnkenbrand · ‎2020-03-31

Now v1.3 with the following options:

Syntax	Description
-s	The option -s performs a cpstop and cpstart when the migrate export tool is executed.
-no_migrate	The option -no_migrate has the consequence that no migrate export is executed.
-port <sms port>	The option -port <sms port> add the management server port, if it's not running on port 443.
-ftpserver <ftp server ip> -ftpuser <username> -ftppw <password>	The ftp options allow to upload the tar file to a ftp server.

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Ruan_Kotze · ‎2020-04-01

Thank you so much for an awesome tool - this has been a gap in my toolbox for so long. The only issue I have picked up in testing is a spelling mistake in the output file, as per attachment.

Thanks again,
Ruan

HeikoAnkenbrand · ‎2020-04-01

Hi @Ruan_Kotze,

THX, I changed that. Is now correct.

Regards
Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Jan_Elbers · ‎2020-04-02

Nice xcript. Thanks

Is there also a backup option for SMB devices?

Paul_Gademsky · ‎2020-04-03

The 1.4 version I posted has been successfully run against 3 different 1200R appliances at this point. Let me know if you have a different experience.

Paul G.

HeikoAnkenbrand · ‎2020-04-03

Hi @Jan_Elbers

The tool supports all SMB applications where no 0.0.0.X IP address is set in the topology.

Regards
Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Harry_Morgan · ‎2020-04-06

Hi @HeikoAnkenbrand

Can I execute the script as cronjob?

HeikoAnkenbrand · ‎2020-04-07

Hi @Harry_Morgan,

If the ebackup tool should be executed automatically, only a cronjob has to be created.
I described it in the article.

Regards
Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Pablo_Montega · ‎2020-04-20

Hello @HeikoAnkenbrand,

Is it possible to add a scp upload?

Thanks

Pablo

Th-Chi · ‎2020-04-27

ssh upload?

HeikoAnkenbrand · ‎2020-04-28

coming soon

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

HeikoAnkenbrand · ‎2020-05-06

Now tested with R80.40.

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

moritz_r · ‎2020-05-14

Thank you for this script.
One question in case of an Endpoint MGMT: is there also a opportunity to use the function of a migrate export with the syntax "--include-uepm-msi-files"?

That would great

Best regards

Moritz

moritz_r · ‎2020-05-15

Hello @HeikoAnkenbrand
now I have a second question:
after adding a test cronjob with ebackup, the topic of the job notification mail includes the users password. Is it possible to hide it?

And Im not sure if it is a typo in the script, because also in the job notification mail, I got an error message:

rm: cannot remove '/tmp/ebachup_cpupload': No such file or directory TERM environment variable not set.

Does this error occur because of "ebachup_cpupload" instead of "ebackup_cpupload". I can find it multiple times in the script.

Best regards

Moritz

Titus_Kimathi · ‎2020-06-21

Hi @HeikoAnkenbrand

Much appreciated tool. Works like a charm on a R80.40-SMS, R80.30/R77.30 gateways, and TE appliance environment.

Regards

Mutumak

yo · ‎2020-06-26

👍🏻

Ave_Joe · ‎2020-07-29

Good day.

Hi. Great work. I am in process of replacing my ancient nightly backup script with ebackup. I would like to see a feature that just does the migrate of the SMS and skips the gateways. In my use case I have 400 appliances that don't really change all the much so I think backing up those once per week makes sense. However the with policy changes, etc. my preference is to use your script to get a migrate done nightly.

Thoughts?

Would this be something others would like to see?

nils_alfer · ‎2020-08-04

Hi @HeikoAnkenbrand.

this is a very nice solution.

Thanks
Nils

wavesurf · ‎2020-08-05

Hi Heiko,

great tool!

What i am missing in all backup methods/tools, is the backup of certain importand files from the device.

Management:

implied_rules.def
table.def
crypt.def
vpn_route.conf
ipassignment.conf
fwrl.conf
trac_client_1.ttm
vpn_table.def
user.def
HKLM_registry.data

Gateways (not SMB)

masters

fwkern.conf

trac_client_1.ttm

simkern.conf
sim_aff.conf
vpnkern.conf
HKLM_registry.data
/etc/rc.d/rc.local
SmsPhones.lst
dynamic_id_users_info.lst
CPprofile.sh
/opt/postfix/etc/postfix/main.cf
mta_postfix_options.cf

BR,

Bernhard

Filters

Sort By

Categories

Easy Backup Tool

Disclaimer: Check Point does not provide maintenance services or technical or customer support for third party content provided on this Site, including in CheckMates Toolbox. See also our Third Party Software Disclaimer.