Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
khineminn
Contributor
Jump to solution

Quantum Spark Redundant IPsec tunnels Using Dual ISPs ISSUE

I am facing an issue with redundant IPsec tunnels using dual ISPs.

WAN link failover is working correctly, and the tunnel shifts to the other ISP as expected. However, the session still retains with the existing Tunnel Creation Time although WAN IP is changed.

The tunnel should automatically reset when switching to a different ISP, but it doesn't do so on its own.

The tunnel works again after manually resetting it by clicking Delete All SAs for the Selected Peer.

I hope you understand my query. Please provide any suggestions on how to reset the tunnel automatically or if there are any special configurations required.

I have also attached the error screenshots.

 

0 Kudos
1 Solution

Accepted Solutions
khineminn
Contributor

Quantum SPARK 1800

R81.10.10 (996002945)

After changing to DPD from CP Proprietary in Advanced, this issue has been resolved and dual IPsec tunnels work fine.

@PhoneBoy  Thank you very much.

View solution in original post

0 Kudos
4 Replies
PhoneBoy
Admin
Admin

What hardware and firmware version?
What are your settings in VPN > Site to Site > Advanced?

0 Kudos
khineminn
Contributor

Quantum SPARK 1800

R81.10.10 (996002945)

After changing to DPD from CP Proprietary in Advanced, this issue has been resolved and dual IPsec tunnels work fine.

@PhoneBoy  Thank you very much.

0 Kudos
skandshus
Advisor
Advisor

Are you able to elaborate what you did because i have the same issue 🙂

 

0 Kudos
PhoneBoy
Admin
Admin

This screenshot should help.

Screenshot 2024-07-30 at 9.07.32 AM.png

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events