Configure checkpoint 730 is a bridge just fold the dial up of the DSL

[Danny3]

I bought a new device and I want and he doesn’t have a DSL modem and I have the old device that is checkpoint 730. I want to configure it just for the modern meaning that the new device will connect will dial from the model in the 730 is it possible

[G_W_Albrecht]

Why not ? Should work.

[Danny3]

Can you explain how to configure the old machine it is a checkpoint 730 so it only be as a bridge and I will dial from the new machine that is Quantum Spark
1575 Appliance

[G_W_Albrecht]

Change the 730 config so it just passes packages between LAN1 connected to 1575 WAN port and 730 WAN port connected to the ISP.

[Danny3]

But my ISP is connected via a dialogue phone line and not directly to the 730 port WAN asks whether it is possible to dial a modem by a new checkpoint 1575

[Danny3]

That's the image "WhatsApp Image 2024-06-27 at 16.07.52_fa0ecd49.jpg" of my 730 checkpoint You can see the DSL connection I want to dial from the new checkpoint 1575 Using PPPoE

Screenshot 2024-06-27 161243

[PhoneBoy]

This needs to be configured on the 730 where the modem is.
You cannot "dial" it from the 1575, as far as I know.
You can bridge the DSL and LAN ports on the 730, I believe, and obtain the IP (via DHCP) on the 1575 with it's WAN being connected to the LAN port of the 730.

[Danny3]

So what you recommend to dial from the 730 and create a connection DHCP I tried this type and I have two issues I have a static IP how do I pass it to the new machine and after few hours the Internet from the DHCP got block in the new machine

[PhoneBoy]

"Internet from the DHCP got block in the new machine" please elaborate.
I don't believe it will be possible to assign that static IP for PPPoE to the 1575.
Some sort of NAT will likely be required here.