Cant turn off or turn on the WAN interfaces from cli

[hleb_hnevashau]

Hi all.

Quantum Spark 1800 Appliance Version: R81.10 (996000558)

I have two WAN interfaces (WAN.6 with name WAN and WAN.820 with name ERSPD) with vlans ID 6 and 820 on one port.

I need to write a script, as a result of which, depending on the conditions, the WAN.820 interface is turned on or off.

But when I enter the command "set interface ERSPD state off" I get an error "Unknown error"
When I enter "set interface ERSPD state on" - error :

Could not set interface dhcp-range-end: Invalid IP address
Could not set interface dhcp-range-start: Invalid IP address

I tried to disable DHCP on this interface - set dhcp server interface ERSPD disable and get an error "Unknown error"

I don't need a DHCP server on these interfaces at all.

I would be grateful if someone could help me.

[G_W_Albrecht]

This works flawlessly on my 1550 (R81.10 (996000575)) ! Did you type in clish # set interface <TAB> to see the available choices ? Or is the error from a script ?

[hleb_hnevashau]

Hi.

Thank you for your reply.

It shows only WAN

>set interface
DMZ
LAN1
LAN2
LAN3
LAN4
LAN5
LAN6
LAN7
LAN8
LAN9
LAN10
LAN11
LAN12
LAN13
LAN14
LAN15
LAN16
LAN17
LAN18
LAN13.20
LAN13.4
WAN

When i try enter "set interface WAN state on", error the same:

Could not set interface dhcp-range-end: Invalid IP address
Could not set interface dhcp-range-start: Invalid IP address

set interface WAN state on - Unknown error

[G_W_Albrecht]

Contact TAC - should not be that way... Maybe a quick Chat with TAC under 1800 MAC ?

[Chris_Atkinson]

Is ERSPD a variable name or something else?

Note build 996000575 is the current GA release of R81.00.00, refer: sk179004.

Also the more recent R81.10.05 is available should you wish to try it, refer: sk179797

[the_rock]

I believe set interface command would work same as on normal Gaia. What options do you see if you type just that as @G_W_Albrecht indicated?