Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
nflnetwork29
Collaborator

1550 sub vlan interface

Does anyone know if the 1550 model supports the creation of Sub VLAN interfaces (SVI) on the physical interfaces?

thank you

0 Kudos
4 Replies
Vladimir
Champion
Champion

It should, especially since it was supported on the older, 1400 series:

 
0 Kudos
Danh
Employee
Employee

If by SVI you mean the ability to define a few VLANs on the same physical port and use IP routing between them, then yes it is supported on the 1500 series.

0 Kudos
patnaik1010
Explorer

Hello There,

I have Model 1550 appliance  and I have two network segments and one wan connection. Is it possible to configure NAT between two LAN network segments. 

LAN Network 1 - 192.168.100.x /24 

LAN Network 2 - 10.7.100.x /24  - Port 5 from LAN port configured with IP address

WAN Network - 192.168.0.x /24 -  Configured on WAN Port 

If any configuration document available to configure intervlan routing & sub vlan interfaces ,please share for reference. 

 

Thanks 

Srinivas Patnaik

 

 

 

 

 

0 Kudos
G_W_Albrecht
Legend
Legend

Here: 1500 Appliance Series R80.20 Locally Managed Administration Guide p.50ff - Configuring the Local Network

0 Kudos