Harmony connect is not able to protect the traffic if IPv6 interface is found

[Blason_R]

Hi Team,

I was testing out this application and not sure if any observed this issue.

I am testing out Harmony connect IA scenario and if the laptop is connected to my company network all the url filtering works as expected. However if I move out of office or connect to my mobile hotspot certain site directly works even if agent is connected.

So I started troubleshooting and concluded that when I move to Mobile Hotspot my IPv6 kicks in and thus looks like traffic for IPv6 is not being tunnelled and gets bypassed.

To confirm I removed the IPv6 stack from wifi and lan port and it started working perfectly fine. 

I re-enabled the IPv6 and its same scenario where if sites are getting resolved with IPv6 hostname gets bypassed.

has anyone experienced this issue?

TIA

Blason R

[Chris_Atkinson · Accepted solution]

Currently a known limitation, please raise it with your local CP SE / local office if this is critical for you.

[Blason_R]

Hmm - Thanks for confirming.

Shouldn't it be raised to RnD?

[Chris_Atkinson]

Yes and that path is via your SE as an RFE to raise the priority of it comparative to other road-map items.