SVC logs

[Sergey_Anikeev]

Colleagues, hello!
Can you tell me, if it is possible to see the failed test SCV events in the gateway side logs?
We need "Not compliance" events on the user side to be displayed in the log server.

We use Secure Configuration Verification (SCV) for MAB VPN clients.

[G_W_Albrecht]

According to sk147416 - Secure Configuration Verification (SCV) this should be possible!

[Sergey_Anikeev]

I have configured this SK, however, all that I see is ->

[G_W_Albrecht]

Sorry, i missed that you use SSL VPN (MAB) - SCV is only possible using IPSec VPN clients that enforce a Desktop policy. 

sk147416: The compliance checks is supported by Endpoint Security Client, Check Point Mobile for Windows, Full Suite version. According to Remote Access Clients for Windows 32/64-bit Administration Guide E80.72 and Higher (page 13).

[Sergey_Anikeev]

I apparently did not write exactly.
We use Mobile Access VPN Clients for Windows

[G_W_Albrecht]

You must use the first option. EPS VPN ! SCV is only possible using IPSec VPN clients that enforce a Desktop policy. CP Mobile has no Desktop Policy (see sk73600 - Check Point Mobile fails to connect due to SCV  and  firewall policy check sk147416 - Secure Configuration Verification (SCV)).

[Sergey_Anikeev]

However, in this client I have a check.

1. A certain process is launched (the check was successful)

2. If a certain process is not found (the check was not successful):

Accordingly, the client either receives access via VPN or not.

[G_W_Albrecht]

This was what i could find - i know that sk67820 lists Security Verification for Endpoint Devices also with Mobile and MAB / SNX, but sk73600 - Check Point Mobile fails to connect due to SCV firewall policy check and sk147416 - Secure Configuration Verification (SCV) state that SCV is only possible using Desktop policy. So better ask TAC !

[Sergey_Anikeev]

Thank you!