Hello CheckMates,
I'am trying to get Remote Access (Check Point Mobile Windows Client) working with a DynDNS address as destination. The destination Gateway is a OpenServer with R80.30.
Is there any way to get this working, I did not find anything in posts, Documents or SKs.
The VPN connection works till the IP address of the provider changed. After deleting the site in the client and reconfigure it, this also worked again. So the configuration is ok, and also the download of the topology has no affect to the destination.
To get to this point I used SK32229 to configure the Link Selection in GuiDBedit. There is also the possibility to change to DNS settings, which seems not to be supported for a gateway which is participating on RemoteAccess community. In my case this would be exactly the thing I need, but this does not worked, so I don't really understand why this is not supported for Remote Access but obviously for Site2Site VPN.
For me it look like the windows client is the "problem" because the DNS name will always be translated to IP (which is not always the best way).
Is there any way to bring the client to use DNS instead of IP, or something which I can do on Check Point side?
Thanks in advance