Remote Access VPN not working after first connect

[AraChennai]

I have setup Remote Access VPN using IPsec, the client connects fine when connected for the first time. But it does not connect after a disconnect. It fails at "Retrieving site information" stage. If I delete and add the VPN connection on client it works just fine. I am running the latest Endpoint Security client version 88.40. I am at a loss on what maybe going on. Any help is greatly appreciated.

[PhoneBoy · Accepted solution]

E88.40 is not the latest client for either Mac or Windows, FYI.

This phenomenon is described well in: https://support.checkpoint.com/results/sk/sk92716
You need to adjust your Link Selection settings accordingly.
If you need to adjust the Link Selection for Remote Access differently from Site to Site VPN, see: https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_RemoteAccessVPN_AdminGuide/C... 

[the_rock]

Apart from what @PhoneBoy had said, I would certainly test this with E88.70 endpoint client version as well.

Andy