Remote Access VPN - ISP redudancy

[Kurt_Abela]

Dear all,

has anyone ever configured Remote Access VPN on an r80.10 mgmt/gw over multiple external links? I am following page 115 of the admin guide http://dl3.checkpoint.com/paid/6a/6a0e3e8c9db992d73daca54eefada918/CP_R80.10_RemoteAccessVPN_AdminGu... 

But i am only able to connect on first try as per sk92383.

Now, sk114623 and sk113617 show that this is actually not supported, albeit that the SKs are a bit old. But why does it explain how to configure this in admin guide if it is not properly supported?

many thanks for your feedback,

Kurt

[PhoneBoy]

I assume you mean this guide: Remote Access VPN R80.10 (Part of Check Point Infinity) 

And you're referring to this section: Configuring Link Selection for Remote Access Only

You can use Link Selection for Remote Access Clients without ISP Redundancy.

If you have a need for both features, this is not currently supported as mentioned in the SKs.

This should probably be noted in the documentation to reduce confusion.

[Kurt_Abela]

Thanks for your quick reply. It is strange that there are fields to configure in GUIDBedit but only mainIP seems to work. It is a rather big limitation considering most other vendors support this.

Thanks for your assistance.

Kurt

[John_Colfer]

Hi Guys

Is this feature still unsupported? IE when ISP redundancy kicks in and the secondary link is live, Remote Access clients cannot connect to seconday ISP.

Best regards

John