Remote Access - BGP - announce office mode networks

[Ivo_Marques]

Hi mates,

We are using BGP on R80.20 gateway for a remote access solution.

Everything works like a charm but we don’t have any clever idea how to announce the routes from the office mode.

We are using ipassignment.conf file with some networks, how can I distribute these networks?

Have somebody an idea?

Regards,

Ivo

[Maarten_Sjouw · Accepted solution]

Add the networks as statics towards the Internet, then you are able to redistribute them.
Unless you have users that try to vpn into the gateway from the LAN (which should not work anyway) you should be fine.

[Ivo_Marques]

Thanks Maarten,

It was our first approach maybe it’s the only solution. I don’t think it’s very sophisticated but will do the job.

Thanks for the reply.

Regards,

Ivo

[Maarten_Sjouw]

Indeed it is not the most elegant solution, but so far the only working solution I was able to find.