Checkpoint VPN with Microsoft 2-Factor Authentication

[Rodrigo_Silva]

Hello everyone

I would like to share with you how I managed to get VPN users to use Microsoft Azure Multi-Factor Authentication.

I saw in some posts that this was possible by using MFA Server, but Microsoft stopped offering MFA Server on July 1, 2019.

What I needed to do:

1 - Office 365 users with MFA enabled.

2 - Dedicated NPS Server.
All Radius requests made to this server will have MFA directed to Microsoft.

3 - NPS extension for Azure MFA
This extension will direct your MFA requests to Microsoft.
You can find the installation and download instructions at the link below.

https://docs.microsoft.com/pt-br/azure/active-directory/authentication/howto-mfa-nps-extension#sync-...

The user can define which method will be used in the Microsoft portal.

I tested the methods below on VPN Clients, Mobile Access and Capsule Workspace and they all worked perfectly.

- Notification through mobile app
- Verification code from mobile app
- Text message to phone

I hope this post helps you

Good luck

[Martins]

Excellent!!!! Thank you for share.

[Ave_Joe]

Thanks for sharing.

Was any testing completed with 'Secondary Connect' in this configuration?

Just curious how it worked if tested.

[Rodrigo_Silva]

We currently use the Dynamic ID.
I created a new profile for testing Microsoft MFA.
When the user will connect he can choose which one to use.
After the tests we will keep only one.

[Konstantinos_In]

Hello Rodrigo

As concerns Management server configuration for 2FA, can you please share it with us?

BR,

Kostas

[Rodrigo_Silva]

You need to direct authentication to the Radius server.

You will need a Radius server with NPS extension for Azure MFA installed.

Remember that all requests to this Radius server will have MFA requests.

This setting is the same for Mobile Access.

[Fabian_Del_Camp]

Rodrigo:

I have a doubt. What kind of messages does the NPS send to the Firewall CheckPoint (VPN Server)? Is a Access-Challenge? 

Regards, 

Fabian

[Jason_Dance]

You may need to extend the RADIUS timeouts to allow for slower RADIUS responses because the end user needs extra time to satisfy the MFA response.  SK112933 covers the configuration changes needed on the Management server, including the trac_client_1.ttm file used by the Endpoint suite clients.

Note that if you need to change the trac_client_1 file, you can set it in fwrl.conf  to push it from management onto the gateways each time a policy is installed.  Let me know if you need the specifics and I'll drop it into this post.

[Pedro_Silva]

@Jason_Dance  I have MFA working successfully with Microsoft Authenticator but not with SMS

Users trying SMS are challenged for the code but when they enter the code they receive via text message the authentication fails.

I think it may be the timeout issue.

I have looked at sk75221 and the trac_client_1.ttm file but I am not sure I understand what is required.

Are you able to post a copy of your working configuration?

I can see where to make the change on trac.defaults on the client but I am hoping to do this in one location and have it auto update all the clients when they next connect.

Thanks

Pedro

[Jason_Dance]

@Pedro_Silva its been a while since I did it, but I remember having to roll out the trac_client_1.ttm file to the machines through our software deployment solution because it didn't come down from the gateway properly.

[Pedro_Silva]

@Jason_Dance  are you able to share the file contents? I found the documentation a little unclear as to the correct format.

Thanks

Pedro

[Sergo89]

Hi Pedro,

did you solve SMS problem? i have same issue like you, everything works except SMS

thanks

[Pedro_Silva]

Sorry, we have moved to another vendor and I can't find any notes about the solution we used. I do think it was a timeout issue.

Suggest contacting checkpoint support.

[Sergo89]

Thanks! Np! i have found solution ...

Make sure that the password encryption protocol between the NPS and NAS servers supports the secondary authentication method that you're using. PAP supports all the authentication methods of Azure AD MFA in the cloud: phone call, one-way text message, mobile app notification, and mobile app verification code. CHAPV2 and EAP support phone call and mobile app notification.

[Ave_Joe]

I wanted to get back to this question as I have got this working in the lab and have validated the results.

With Secondary Connect (transparently connect users to distributed resources) users get an MS Authenticator 'Approve' request every time the remote access client connects to another gateway. 

So for sites that have Remote Access users relying on Secondary Connect to access resources distributed across the globe using the NPS Extension for Azure MFA is not the best user experience.

To my knowledge there is not a way to change the behavior of the NPS Extension so it will NOT send another request to Azure MFA if a previous authenticated session is already established.

Has anyone had a different experience with the setup of Secondary Connect and the NPS extension for Azure MFA?

Cheers!

--AJ

[JustTesting]

Did you ever end up finding a solution for secondary connect? We make heavy use of it as well

[PhoneBoy]

Thanks for sharing this.
Moving it to the Remote Access space.

[jcavet]

Great info Rodrigo, did you have to do any specific configuration on the NPS server outside of getting the extension?

I've gotten a new AU configured with using Radius and cannot get a prompt for an MFA code.

[Pedro_Silva]

Make sure you don't have any punctuation or special characters in your Radius Shared Secret.

A single ' caused my configuration to break. The NPS server was authenticating the user but then failing to pass the information back to the gateway.

My working configuration is:

RADIUS server object in Checkpoint Smart Console - configured for Radius Version 2.0 and MS_CHAP2

NPS server with Network Policy to Grant Access to AD User groups using matching Authentication Method.

On NPS Server you can see the authentication events in Event Viewer under Custom Views\Server Roles\Network Policy and Access Services

[Rodrigo_Silva · Accepted solution]

Everything I needed to configure the NPS server I found on the link https://docs.microsoft.com/pt-br/azure/active-directory/authentication/howto-mfa-nps-extension#sync-...

[Chris_Atkinson]

Very helpful, thanks for sharing!

(Refer also sk114263)

[anstelios]

Configuring an External User Profile (generic*) with Radius authentication on SmartDashboard is  still needed for this, right??

[Rodrigo_Silva]

It depends on your policy. My configuration allows VPN connection by AD group. Regardless of whether it is per AD user, or per local user, authentication needs to be sent to the radius server.

[Tux234]

Thanks for the documentation, could you say what you did on CheckPoint's side to make this work. We have been struggling the last few weeks to make this work, and haven't made any headway. I've configured the RADIUS server with the NPS extension, and we've setup RADIUS authentication on the gateway, but we keep getting a username/password error. Is there another way to set this up that will allow it to work? Would you mind sharing what your working setup looks like? We've been banging our head against the wall the last few weeks, and as you can tell it's starting to show. Appreciate any help that you can give.

[Rodrigo_Silva]

I'm sorry for the late reply.
At CheckPoint I just needed to set up a new radius server and direct authentications to it.
You can even put MFA on who will connect to SmartConsole,

[anstelios]

We cant get mobile app notification method to work!

Verification code and SMS to phone work fine!

Any ideas?

[AZ-Joe]

Can you post steps for configuring for SMS to phone or Verification code?  I've been struggling to get this to work at all!

[Rodrigo_Silva]

1 - Your company must have at least one free Azure AD account, and your on-premises AD users must be in sync with the cloud.
2 - In the user's guide, on the office 365 portal, there is the option to manage the double factor of authentication. There you enable the double factor for each user.
3 - The user needs to access the portal.office.com website and complete the configuration.
I don't know if that was your question.
Hope this helps.

[Rodrigo_Silva]

Check if you are having problems with HTTPS Inspection.
In our case it only worked on the 3G network. Then I found out that it was URL inspection.
Now everything works great.

[af0e2c12-4d24-3]

For anyone running across this thread when setting this up.

You may also need to make sure your RADIUS udp service doesn't have aggressive aging and set a custom virtual session timeout matching the timeout you want. In my case aggressive aging was timing out the UDP virtual session after 15 seconds then the UDP replies were getting blocked by firewall stealth rule and "radius servers not responding" was getting logged.