Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Mahadevan
Contributor

Unable to view logs in Smart Console for Version R81.10

Hello All,

We have installed Checkpoint Version R81.10 and its respective Smart Console.

Monitoring and Logging/Status are activated in Blades.

But we are unable to see any logs in Smart Console - Logs & Monitor. 

The error is - Failed to get results. 

Please find the attached image for reference. Kindly let me know the changes to make. 

Thanks

Muthu Mahadevan 

0 Kudos
10 Replies
Chris_Atkinson
Employee Employee
Employee

Please update the SmartConsole client per the notification shown and advise the JHF Take used on the management? 

CCSM R77/R80/ELITE
0 Kudos
Mahadevan
Contributor

Hello Chris,

Thanks for the suggestion. We have updated with the Jumbo Fix. But still unable to see the logs in SmartConsole. 

Please find the attached image for reference. Let us know any additional changes to make. 

Thanks

Muthu Mahadevan 

0 Kudos
G_W_Albrecht
Legend Legend
Legend

I can see no SMS ???

CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
Mahadevan
Contributor

Hello,

Please find the output for cpwd_admin list attached image. We are still getting failed to get results after the Jumbo Hot fix. 

Can you please let us know the settings to check and change ? Your assist will be of great help to us 

Thanks

Muthu Mahadevan

0 Kudos
Chris_Atkinson
Employee Employee
Employee

Why are there multiple threads created for this issue?

https://community.checkpoint.com/t5/Management/show-logs-API-timeout-reached/td-p/160565#M32383

If it's urgent and you have support please contact TAC for assistance.

 

CCSM R77/R80/ELITE
0 Kudos
Sorin_Gogean
Advisor

hello,

 

have you tried on your management/log server to restart CKP services ?

(like cpstop & cpstart ) 

On our LOG server (as it's separate than the management) usually I get OK if I restart the indexing service - give it a try:

"Restart the process of "Log indexing" by running:

-For Smart management server run the following.
[Expert@HostName:0]# evstop
[Expert@HostName:0]# evstart "

 

Ty,

0 Kudos
Jung_Patrick
Participant

Hello. all.

I also had a similar issue.
No error messages are generated.
The same goes for opening past log files.
Just the screen is blank.

cpstop;cpstart does not solve it, and rebooting does not solve it.

So, the current log is opened with SmartView Tracker.

smartview tracker works fine.

HW: smart-1 600S
OS: R81.10 + JHF T79 + latest Smartconsole

Log indexing off.

 

empty log.png

0 Kudos
the_rock
Legend
Legend

Can you send the output of df -h on mgmt server? The smart console error could be related to it.

Andy

0 Kudos
Jung_Patrick
Participant

hello.

[Expert@Test_server:0]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_splat-lv_current 50G 11G 40G 21% /
/dev/sda1 291M 80M 197M 29% /boot
tmpfs 16G 5.1M 16G 1% /dev/shm
/dev/mapper/vg_splat-lv_log 1.6T 1.4T 181G 89% /var/log
cgroup 16G 0 16G 0% /sys/fs/cgroup

0 Kudos
the_rock
Legend
Legend

Ok, so I see there is 181 G free, but its at 89% capacity. Any way you can get it down to at least 80% free and try again?

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events