Tracking Licenses on MDS

[Hugo_vd_Kooij]

Hi,

I have a bit of an issue tracking license assignments on MDS.

If I use the `cplic print` command I get a list od domain licenses. But I can't see if a license is assigned to a domain.

When I go into a domain with `mdsenv MyDomain`and issue the smae command the output is identical except for the additional licenses on the gateways.

But if I remove an expired license from a domain becuse we removed an old gateway then following the `cplic del ....`command I get a much shorter list showing only the licenses relevant to the domain.

So it seems one should be able to obtain that information from the CLI. But I can't ind an option to get the proper output per domain.

And I don't feel like doing the long workaround. and install a dummy license on each domain and the removing it again just to get that list.

[PhoneBoy]

Curious if the file cp.license on each domain contains "all" of the license until you perform a cleanup action (e.g. remove an expired license).

[G_W_Albrecht]

https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_SecurityManagement_AdminGuid...

-D	On a Multi-Domain Server , prints only Domain licenses.

[Tal_Paz-Fridman]

In my environments it shows exactly the same output on the MDS and Domain level.

This is expected since there is no dedicated license per Domain but a "pool", for example.

CPSM license for general management blades

CPSB-DOMAINS-5 CPSB-GBLP license for 5 Domains and for Global Policy