Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
subrun_jamil
Contributor
Jump to solution

Smart DashBoard is not Logging in - Version R77.30

Hello,

I have a CheckPoint Setup which is Managed from Windows SmartDashBoard , meaning Client and SmartDashboard is on same Server.

For last few days, I am not able to login to SmartDashboard Software , rather it shows attached error.

Version R77.30 , I know it is out of support , but box is going to be refreshed soon.

As I am not able to login to SmartDashboard , I am not able to see the Firewall Rules. 🙂

Is there any idea what should I do to restore the access to smartdashboard. ? Note that FW is having no issue Only access to SmartDashboard is not working.

Important note is - I can Login to CP SmartView Tracker with no issues but not able to login to Smart Dashboard.

 

1.JPG

2.JPG

 

0 Kudos
1 Solution

Accepted Solutions
the_rock
Legend
Legend

Its windows mgmt server...wow, had not seen that in a long time : - ). Though, ages ago, I managed to install standalone on windows, what a nightmare that was, haha. Anyway, if fwm is up and running, which it shows it is, can you try reinstall smart console from the link I gave?

Andy

View solution in original post

0 Kudos
19 Replies
Chris_Atkinson
Employee Employee
Employee

Which specific build of R77.30 SmartConsole is used and on what windows version ?

If you can open SmartView tracker check the "about" information or similar to confirm.

CCSM R77/R80/ELITE
0 Kudos
subrun_jamil
Contributor

@Chris_Atkinson 

Hello Chris,

Here I attached the info from Smart View Tracker.

3.JPG

And Windows version is 2012 R2

0 Kudos
the_rock
Legend
Legend

Do you have ssh access to it? If yes, run cpwd_admin list from expert mode and verify if fwm is up and showing E 1. If not, then you can run cpwd_admin command and it will tell you how to stop it/start it. If fwm is up, then its possible you may need to reinstall the smart console gui. 

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

Alternatively, you can navigate to c/program files(x86)/CheckPoint/SmartConsole/R77.30 and look for smart console gui there.

Hope that helps.

Andy

0 Kudos
subrun_jamil
Contributor

Hello,

SmartDashboard Server is Installed in Windows machine meaning client and SmartDashboard server is on same machine.

I ran cpwd_admin list and shows E 1 ( attached ) cpws_admin_list.JPG

0 Kudos
subrun_jamil
Contributor

Also I saw disk free is 9% could that be an issue  ? But at Windows server  I see C Drive has 30% GB free.

GW_Status.png

0 Kudos
the_rock
Legend
Legend

Its windows mgmt server...wow, had not seen that in a long time : - ). Though, ages ago, I managed to install standalone on windows, what a nightmare that was, haha. Anyway, if fwm is up and running, which it shows it is, can you try reinstall smart console from the link I gave?

Andy

0 Kudos
subrun_jamil
Contributor

🙂  I will try this and let you know.

the_rock
Legend
Legend

By the way, what I would also try is if you can install smart console on another PC from the same subnet and test, at least that would rule out if that specific machine is the issue, depending on the result you get.

0 Kudos
subrun_jamil
Contributor

I certainly can do that. Quick dumb question, if I reinstall the software , will I loose the connection to GWs ?

0 Kudos
the_rock
Legend
Legend

As my late grandfather who was the army man his whole life used to say "There is no dumb question if its truly genuine", you are fine asking that, all good brother : - ). By the way, answer is definitely not, you wont lose connection to the gateways, because its simply smart console, which is only GUI needed to log into the actual mgmt server,

Think of it this way, literally the simplest comparison...say if your Edge browser was corrupt, your Internet will still work, but its same as re-installing any browser, so no harm done at all.

Andy

0 Kudos
the_rock
Legend
Legend

As they say "No news is good news"...hope its fixed? : - )

0 Kudos
Tal_Paz-Fridman
Employee
Employee

I think that it is important to state that R77.30 has reached its EOL over 5 years ago and you are encouraged to moved to a newer version. 

 

 

0 Kudos
G_W_Albrecht
Legend
Legend

Do we still have an upgrade path from R77.30 Windows SMS ? Upgrade/Download Wizard tells us to

Please follow the below upgrade path :

1. Upgrade from R77.30 to R80.40 :

Check Point R80.40 Gaia Fresh Install and Upgrade

2. Upgrade from R80.40 to R81.20 :

Check Point R81.20 Gaia Fresh Install and upgrade

But how to get Windows Upgrade Tools for R77.20 to R80.40 ?

CCSE CCTE CCSM SMB Specialist
0 Kudos
_Val_
Admin
Admin

Try the following:

1. Uninstall SmartDashboard from your windows machine, clean all related folders and registry.
2. On the management server, delete: 

    • $FWDIR/conf/applications.* 
    • $FWDIR/conf/CPMILinks*
    • run cpstop ; cpstart, or reboot management server.

3. Re-install SmardDashboard and try again.

If you still cannot open the application, you are pretty much doomed, considering R77.30 is out of support for eons now.

0 Kudos
subrun_jamil
Contributor

Hi @_Val_ 

I have mentioned in the note Client and SmartDashBoard is on same Windows machine.

0 Kudos
_Val_
Admin
Admin

Try a different Windows cline then. Running SMS on Windows is a really bad idea in the first place.

0 Kudos
the_rock
Legend
Legend

Hey, did you try what we discussed last night to see if it makes any difference? Lets do remote session if you are available, I think I can help you out.

Cheers.

0 Kudos
subrun_jamil
Contributor

@the_rock  You are a Hero.. It worked after Installing R77.30.03 SmartDashboard Software. Heartfelt thanks to all of you helped me while suggesting here.

Moving to refresh these boxes..

0 Kudos
the_rock
Legend
Legend

All good man! Its always a team effort, glad it worked, thats all I care about 🙂

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events