R80.4 Management with R80.20 Gateway

[msantos]

Hi all, is R80.40 management able to manage R80.20 Gateways? cause im trying to establish SIC communication beetwen those two and i can't. i already checked all, communication, and all of that.

[PhoneBoy]

Yes, this is supported.
Please detail each step you did and the precise errors/behavior you see with each.

[msantos]

ok, i have a new security management deployed as Open Server in R80.40 version. and i have a remote 3200 gateway in R80.20.

i did the basics steps, add new gateway, at the moment of stablish sic i got this message in wizard mode: Failed to connect to the security Gateway, SIC cannot be stablished.

and in clasic mode i got this error at test sic status: Peer sent wrong DN

[PhoneBoy · Accepted solution]

It suggests some sort of corruption with SIC.
See: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...
You may want to engage with the TAC here.

[msantos]

Yeah, i see that is supported, thanks. what i did was reset sic configuration on the remote gw via cli, and then it worked.