Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
nflnetwork29
Advisor
Jump to solution

Policy verification failed.

Is it permitted to have the application & URL filtering blade at the layer 1 position?

When i try to push policy to my pre R80 gateway i get the following error. 

Gateway: SMB1430_GW
Policy: Standard
Status: Failed
- Application and URL Filtering Policy must have 'Applications & URL Filtering' blade enabled before you can install on gateways earlier than version R80.10.
- Policy verification failed.
--------------------------------------------------------------------------------

I have enabled the blades. Not sure why it says to make sure the blade is enabled. 

app.PNG

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

Pre-R80 gateways have different layers for firewall and App Control rules and the firewall layer must be first.
This also applies to SMB gateways as well.

View solution in original post

2 Replies
nflnetwork29
Advisor

if i move network to layer 1 and application/URL to layer 2 the policy install works fine. 

0 Kudos
PhoneBoy
Admin
Admin

Pre-R80 gateways have different layers for firewall and App Control rules and the firewall layer must be first.
This also applies to SMB gateways as well.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events