How to get a list of FW with IPS blade enabled

[Etheldra_Freder]

IPS- is there a command or script that can be run to list which firewalls are running IPS?
I have an inventory script that I run to get inventory and MAC address. Can the blade value, in this case IPS, be added to it? If not, does anyone have any suggestions on how I can run a command, etc. and output that tell me if IPS is enables or not on a firewall.

Thanks

[Vladimir]

ips stat, I think, just keep in mind "ips stat" command shows IPS blade is enabled on R76SP.XX / R7X Security Gateway managed by R80.X Ma... 

[G_W_Albrecht]

# ips stat
IPS Status: Enabled
IPS Update Version: 635186418
Global Detect: Off
Bypass Under Load: Off

# fw ver
This is Check Point's software version R80.20 - Build 014

[Etheldra_Freder]

If I run this command "ips stat" on the MDS. It tells me that "Local host is not a FrrWall-2 Modul". I want to avoid going to each FW to run this command ( we have several). I would like to know if I can run it from the MDS, using the current inventory script.

[Danny]

Etheldra wrote:

I have an inventory script that I run to get inventory and MAC address. Can the blade value, in this case IPS, be added to it?

Which inventory script are you referencing to?

[Etheldra_Freder]

Good Day,

I am using the script given by Checkmate support a few months ago. It gives the mac address, jhf, OS, FW name.

[Mike_A]

I believe this is the script being referenced, by Kaspars Zibarts‌

https://community.checkpoint.com/thread/7023-security-gateway-inventory 

[Etheldra_Freder]

Yes, you are correct. I forgot his name and did not want to be rude.

[Timothy_Hall]

Although not a CLI tool, in the SmartConsole the License Report will provide blade eligibility and activation status for all gateways in a handy single report that can be exported to PDF or Excel.  It is located under the Actions menu on the Gateways & Servers tab.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com