Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
genisis__
Leader Leader
Leader

Found an indication that the current domain was migrated, and the migration had failed

I recently encountered  this issue while migrating a R77.30 SMS to a new R80.40 SMS, so thought I would share the resolution.

The migrate process was all good, and initially the daemons all started, however after cpstop;cpstart the FWM process failed to start.

Investigated the fwm.elg file which implied a corruption while migrating a domain (note: this is a SMS not MDS environment). 

"Found an indication that the current domain was migrated, and the migration was unexpectedly interrupted.  Cannot start after such an interruption"

I contacted TAC who determine the following procedure should be used to resolve this issue.   This procedure is documented in a Internal SK:

Resolution Summary:
FWM process showed below error:
After a successful migrate export to R80.x, $FWDIR/scripts/cpm_status.sh shows "Check Point Security Management Server is running and ready".
"api status" shows Overall API Status: Error : FWM Is Not Running!
FWM daemon does not start even after reboot or cprestart
"fwm -d" output shows:
CPPRODIS_init_error_logging_ex: initialized error logging for product 'FW1' application 'FWM'. Log file is not set.
raise_file_limit: raising limit from 65535 to 65535
Found an indication that the current domain was migrated, and the migration had failed. Cannot start after a migration failure
destroy_rand_mutex: destroy
We followed below workaround to solve the issue:

1- Log to the Expert mode on the management server
2- Locate any files named "migration_had_failed" or "migration_in_progress" (In my case it was 'migration_in_progress'):
3- find / -name migration_had_failed | migration_in_progress
     Possible location of the file : $MDS_FWDIR | $FWDIR

5- $FWDIR/conf/migration_in_progress
6- moved this file from the current directory, to /var/tmp
7- Run "cprestart"

(3)
6 Replies
Raven
Participant
Participant

Have same situation after migrating from R80.40 SMS to R81.10 SMS.

Your post saved me ...

Thank You.

George_Liu
Contributor

Hi @genisis__ 

I encounter this issue today, follow you steps was solved this issue.

Thank you so much.

 

George

huseyinyildirim
Participant

You just saved my life. Thank you.

And
Participant

It helped me as well. 
Whilst sk139552 was not that helpful
Troubleshooting "Unable to connect to server. Please make sure that all processes of the server are ...

Thank you very much!

Solo
Participant

wow,as your solution , I solved the issue ,thanks.

genisis__
Leader Leader
Leader

Glad it helped.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events