Configuration script via SmartProvisioning

[Basyuk]

Hello!

How can I write Configuration Script via SmartProvisioning for 'add' command?

For example, if I want to add administrator, but he is already exist, then Provisioning State will show me an error and following commands will not be executed.

[PhoneBoy]

The scripting language for SmartProvisioning is the expert shell (bash).
You may want to check for the presence of the admin prior to adding them to ensure the script doesn't fail or do some other error catching in your script.

[Basyuk]

The configuration script in the provisioning profile settings works only in clish. Am I wrong?

[PhoneBoy]

Pretty sure it's bash based on: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

[Basyuk]

You write about the run script function, and I write about the configuration script function in the provisioning profile settings.

Screenshot in attachment.

[PhoneBoy]

Yeah, it would make sense that was based on clish.
Maybe add set clienv on-failure continue to the script.
This should allow the script to continue if one of the commands fails.
Not sure if this is in Embedded Gaia, but it works in regular Gaia.

[Igor_Demchenko]

Hi, @PhoneBoy! 
No, this is not in Embedded Gaia . But is there any solution for it?

I have 1120/1430 devices.

[PhoneBoy]

The commands executed in the "Configuration Script" would be interpreted as per the expert shell.
To execute clish commands to configure the device, you need to call clish -c with each command needed to do it.
That's what is implied by: https://support.checkpoint.com/results/sk/sk111452 

Whether this works with Embedded Gaia devices (1120/1430 are older EOL devices) is a separate question.