Hello everybody,
We are comming from R80.10 standalone console with SmartEvent integrated solution where everything works perfectly.
Now after upgrade to R80.30 (new VM and import config) We are suffering a loop in CPSEMD process: during 10 times its try to unsucessfully start and then the count is reset to "0" and Terminated (After a while the loop start again)
CPSEMD 27446 E 8 [08:47:28] 5/10/2020 N cpsemd
While the loop is running is not possible access to smartdashboard because a timeout, and the API doesnt work either, when the loop is NOT running everything works fine as far I know.
There is a case opened with checkpoint but after a month they still dont know what is the root issue, the only solution we are tried is increase the DB max size.
cpsemd.elg show always the same loop messages fails:
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:47:29] CPSEMD: Mon Oct 5 08:47:29 2020
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:48:04] CDBConnection::connect2Server: Connection cannot be initiated. Please make sure that 'localhost' is up and running and correctly defined. fwm may still be initializing.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:48:04] Error: Failed to connect to CPMI locally in try number #1. FWM is probably still initializing. Will try again in 10 seconds.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:48:49] CDBConnection::connect2Server: Connection cannot be initiated. Please make sure that 'localhost' is up and running and correctly defined. fwm may still be initializing.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:48:49] Error: Failed to connect to CPMI locally in try number #2. FWM is probably still initializing. Will try again in 10 seconds.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:37] CActiveMQClient::initConnection: before connection start, if stuck check ssl parameters.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:37] CActiveMQClient::initConnection: Connection initiated successfully.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:39] No resolving for objects will be done. In order to enable this kind of resolving, please change the registry ResolveObjects to be 1.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:39] No DNS resolving will be done. In order to enable this kind of resolving, please change the registry ResolveDNS to be 1.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:39] CSeamApplication::_UpdateDefinedCorrUnit: Error getting correlation units set: Operation not permitted
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:43] CDBConfiguration::RefreshStatus() - Failed to calculate available DB max size.
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:43] registry value for "HandleIPSFollowUp" is =0 then no ips follow up handling will be performed
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:43] registry value for "HandleDLPFollowUp" is =0 then no dlp follow up handling will be performed
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:50] CSeamApplication::msg_cb: FAILED to connect to messaging server
[CPSEMD 27446 4060125184]@GESN01[5 Oct 8:49:50] CSeamApplication::msg_cb: disconnected
[CPSEMD 27446 3838835520]@GESN01[5 Oct 8:51:49] Warning:cp_timed_blocker_handler: A handler [0x82289f0] blocked for 119 seconds.
[CPSEMD 27446 3838835520]@GESN01[5 Oct 8:51:49] Warning:cp_timed_blocker_handler: Handler info: Library [cpsemd], Function offset [0x1e09f0].
[CPSEMD 27446 3838835520]@GESN01[5 Oct 8:51:49] Warning:cp_timed_blocker_handler: Handler info: Nearest symbol name [_ZN23CAutomaticPolicyBuilder33__sched_SchedListenToNotificationEPv], offset [0x1e09f0].
[CPSEMD 2072 4061050880]@GESN01[5 Oct 8:55:29] CPSEMD: Mon Oct 5 08:55:29 2020
Thanks in advance,
