Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Terry
Contributor

Assigned IPs Endpoint Security (DHCP?)

Jump to solution

Hello,

We want to check the usage of our ip range applied to Endpoint Security. Can someone point me in the right direction?

1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

There are a couple ways to do this:

  • SmartView Monitor
  • From the gateway: fw tab -t om_assigned_ips -f
  • Search the logs as Maarten already suggested

View solution in original post

7 Replies
PhoneBoy
Admin
Admin

Are you talking about clients connected via VPN?

That would be here in the gateway object:

0 Kudos
Maarten_Sjouw
Champion
Champion

I think you're referring to the actual usage of the IP's, correct? If so, you can look in tracker to see the clients by filtering the connection setup and the IP range, there you can see which user has which IP.

Regards, Maarten
0 Kudos
Terry
Contributor

So as far as you know, there is not a way to see current address leases?

0 Kudos
PhoneBoy
Admin
Admin

Can you clarify which host is providing the DHCP in this case and how they are connecting?

0 Kudos
Terry
Contributor

IP pool on the firewalls. We are using Checkpoint endpoint security clients. 

PhoneBoy
Admin
Admin

There are a couple ways to do this:

  • SmartView Monitor
  • From the gateway: fw tab -t om_assigned_ips -f
  • Search the logs as Maarten already suggested

View solution in original post

Terry
Contributor

Exactly what I needed. Thank you.

0 Kudos