Solved: is it possible /supported to run fw ctl zdebug on ...

andymong · ‎2021-01-27

I can't seem to find any documentation regarding this. sk100808 doesnot include R80.20SP, apparently.

Timothy_Hall · ‎2021-01-27

On Scalable Platforms use command fw ctl zdebug -m fw + drop if executing it from gclish, otherwise from expert
mode use command g_fw ctl zdebug -m fw + drop. Note that Scalable Platforms also have a special command called
asg_drop_monitor, that can show real-time packet drops occurring for other capacity reasons such as drops at the NIC
hardware level and CoreXL queuing drops.

Attend my online "Be your Own TAC: Part Deux" CheckMates event
March 27th with sessions for both the EMEA and Americas time zones

View solution in original post

Vincent_Bacher · ‎2021-01-27

just tested it on a vs at a 61k running R80.20SP and it seems to work.

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite

Timothy_Hall · ‎2021-01-27

On Scalable Platforms use command fw ctl zdebug -m fw + drop if executing it from gclish, otherwise from expert
mode use command g_fw ctl zdebug -m fw + drop. Note that Scalable Platforms also have a special command called
asg_drop_monitor, that can show real-time packet drops occurring for other capacity reasons such as drops at the NIC
hardware level and CoreXL queuing drops.

Attend my online "Be your Own TAC: Part Deux" CheckMates event
March 27th with sessions for both the EMEA and Americas time zones

andymong · ‎2021-02-02

Thank you very much! asg_drop_monitor has been deprecated. It is now just drop-monitor instead .

is it possible /supported to run fw ctl zdebug on scalable platform? (chassis)