is it possible /supported to run fw ctl zdebug on scalable platform? (chassis)

[andymong]

I can't seem to find any documentation regarding this. sk100808 doesnot include R80.20SP, apparently.

[Vincent_Bacher]

just tested it on a vs at a 61k running R80.20SP and it seems to work.

[Timothy_Hall · Accepted solution]

On Scalable Platforms use command fw ctl zdebug -m fw + drop if executing it from gclish, otherwise from expert
mode use command g_fw ctl zdebug -m fw + drop. Note that Scalable Platforms also have a special command called
asg_drop_monitor, that can show real-time packet drops occurring for other capacity reasons such as drops at the NIC
hardware level and CoreXL queuing drops.

[andymong]

Thank you very much! asg_drop_monitor has been deprecated. It is now just drop-monitor instead .