Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Wolfgang
Authority
Authority
Jump to solution

„ip-conflicts-monitor“ not available under gclish in SG

Following the documentation Detection of IP Address Conflicts you can monitor duplicate IP addresses. I tried but the option does not exist.

FW> show ip-conflicts-monitor
CLINFR0329 Invalid command:'show ip-conflicts-monitor'.

FW> set ip-conflicts-monitor on
CLINFR0329 Invalid command:'set ip-conflicts-monitor on'.


This command is available on normal gateways but not with Maestro. Is it a bug or how it is?

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

It appears this was missed when the SP codebase was merged into maintrain.
R&D is now aware of it and are looking at closing this gap.
A TAC case may be useful for tracking purposes.

View solution in original post

8 Replies
PhoneBoy
Admin
Admin

I don't see any documentation or TAC cases on this.
I'll ask internally.

0 Kudos
PhoneBoy
Admin
Admin

It appears this was missed when the SP codebase was merged into maintrain.
R&D is now aware of it and are looking at closing this gap.
A TAC case may be useful for tracking purposes.

Wolfgang
Authority
Authority

Thanks Dameon, I‘ll open a TAC case for follow up.

0 Kudos
the_rock
Legend
Legend

I think this is the same command you posted about recently. I also looked, cant find anything for maestro.

Andy

0 Kudos
Wolfgang
Authority
Authority

You‘re right @the_rock . I checked your results on some other environments. It’s available with VSX, ClusterXL and single gateway. But not in a Maestro SecurityGroup, that‘s why I post additional under Maestro.

0 Kudos
Lesley
Advisor
Advisor

What if you run it on normal clish from a gateway? Maybe gclish is typo in documentation. 

I have no idea aswell, should be TAC case. 

Able to see arp table?

https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_Maestro_AdminGuide/Topics-Maestro-...

-------
If you like this post please give a thumbs up(kudo)! 🙂
0 Kudos
the_rock
Legend
Legend

Maybe TAC can confirm, though Im 99% sure its not available on maestro.

Andy

0 Kudos
Wolfgang
Authority
Authority

Just an update....

command is available and working in local clish but not in gclish

Following documentation Detection of IP Address Conflicts it should be run in gclish but can't

  • On Scalable Platforms (Maestro and Chassis), you must run the applicable commands in Gaia gClish of the applicable Security Group.

TAC case is open and I'll hope it will be merged to gclish. 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

 
Upcoming Maestro Events