Maestro Management Port and SFP Transceiver Module Compatibility

[yediaelchrist]

Hi All,

I want to ask 2 questions related with ports of Maestro:

1. From Check Point Maestro R80.20SP Getting Started Guide document (on page 30), ports 1-4 of MHO-140 are intended for Management purposes. My question here, are those ports also capable of 1/10G like the rest of Uplink and Downlink ports?
2. Are the 48 x 10G ports of MHO-140 compatible with the following SFP transceiver modules:
   • CPAC-TR-10SR-B
   • CPAC-TR-10SR-C
   • CPAC-TR-1T-B
   • CPAC-TR-1T-C
   • My question in this point is because if you look closely in the description of those SKUs, there is "compatible with XXX only" statment (for example CPAC-TR-10SR-C SFP+ transceiver for 10G fiber Ports - short range (10GBase-SR) compatible with CPAC-4-10F-C only)

Thanks.

Cheers,

Yedi

[_Val_]

@Anatoly can you please answer here?

[Anatoly · Accepted solution]

Hi,

1. Yes, ports 1-4 on MHO-140 are compatible with 1Gbps or 10Gbps transceivers

2. Please look sk92755. In this SK you have exact transceiver types you can use with any of MHOs

[yediaelchrist]

Hi Anatoly,

Thanks a lot for you response, it gave me much clarity now.

Cheers,

Yedi

[Anatoly]

Welcome!

Anatoly

[Gustavo_Ferreir]

Hi.

Is it possible to use other MHO interfaces with 1Gbps copper transceivers, or only interfaces 1-4?

We have a customer who needs to make some uplinks at 1Gbps RJ-45.

Thanks.

[Anatoly · Accepted solution]

Dear Gustavo,

It's possible. For a full list of supported transceivers see sk92755.

Thanks

[Gustavo_Ferreir]

Great, I had already seen this SK and I saw that the CPAC-TR-1T-B transceivers and CPAC-TR-1T-C are 1Gbps RJ-45 and supported on MHO140, I was wondering if they would be supported only on interfaces 1-4 for management or if they can also be used on uplink interfaces 5-48.

Thank you.

[Anatoly]

1Gbps cannot be used in port 48, as it's predefined as sync. Sync is 10G only

[Gustavo_Ferreir]

So I can use interfaces 1-47 at 1Gbps, correct?

[Anatoly]

yes

[Gustavo_Ferreir]

Many thanks Anatoly.