Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
yediaelchrist
Participant

Maestro Management Port and SFP Transceiver Module Compatibility

Jump to solution

Hi All,

I want to ask 2 questions related with ports of Maestro:

  1. From Check Point Maestro R80.20SP Getting Started Guide document (on page 30), ports 1-4 of MHO-140 are intended for Management purposes. My question here, are those ports also capable of 1/10G like the rest of Uplink and Downlink ports?
  2. Are the 48 x 10G ports of MHO-140 compatible with the following SFP transceiver modules:
    • CPAC-TR-10SR-B
    • CPAC-TR-10SR-C
    • CPAC-TR-1T-B
    • CPAC-TR-1T-C
    • My question in this point is because if you look closely in the description of those SKUs, there is "compatible with XXX only" statment (for example CPAC-TR-10SR-C SFP+ transceiver for 10G fiber Ports - short range (10GBase-SR) compatible with CPAC-4-10F-C only)

2020-06-22_23-34-17.jpg

 

Thanks.

 

Cheers,

Yedi

 

 

0 Kudos
2 Solutions

Accepted Solutions
Anatoly
Employee
Employee

Hi,

1. Yes, ports 1-4 on MHO-140 are compatible with 1Gbps or 10Gbps transceivers

2. Please look sk92755. In this SK you have exact transceiver types you can use with any of MHOs

View solution in original post

Anatoly
Employee
Employee

Dear Gustavo,

It's possible. For a full list of supported transceivers see sk92755.

 

Thanks

View solution in original post

0 Kudos
11 Replies
_Val_
Admin
Admin

@Anatoly can you please answer here?

0 Kudos
Anatoly
Employee
Employee

Hi,

1. Yes, ports 1-4 on MHO-140 are compatible with 1Gbps or 10Gbps transceivers

2. Please look sk92755. In this SK you have exact transceiver types you can use with any of MHOs

yediaelchrist
Participant

Hi Anatoly,

Thanks a lot for you response, it gave me much clarity now.

 

Cheers,

Yedi

0 Kudos
Anatoly
Employee
Employee

Welcome!

 

Anatoly

0 Kudos
Gustavo_Ferreir
Participant

Hi.

Is it possible to use other MHO interfaces with 1Gbps copper transceivers, or only interfaces 1-4?

We have a customer who needs to make some uplinks at 1Gbps RJ-45.

 

Thanks.

0 Kudos
Anatoly
Employee
Employee

Dear Gustavo,

It's possible. For a full list of supported transceivers see sk92755.

 

Thanks

0 Kudos
Gustavo_Ferreir
Participant

Great, I had already seen this SK and I saw that the CPAC-TR-1T-B transceivers and CPAC-TR-1T-C are 1Gbps RJ-45 and supported on MHO140, I was wondering if they would be supported only on interfaces 1-4 for management or if they can also be used on uplink interfaces 5-48.

 

Thank you.

0 Kudos
Anatoly
Employee
Employee

1Gbps cannot be used in port 48, as it's predefined as sync. Sync is 10G only

0 Kudos
Gustavo_Ferreir
Participant

So I can use interfaces 1-47 at 1Gbps, correct?

0 Kudos
Anatoly
Employee
Employee

yes

Gustavo_Ferreir
Participant

Many thanks Anatoly.

0 Kudos