Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Jarvis_Lin
Collaborator
Jump to solution

How to change smo ip address

Hi all,

We need to change SMO IP from x.x.x.x to y.y.y.y

Is there any steps or guide to change the IP of SMO?

 

0 Kudos
1 Solution

Accepted Solutions
Dario_Perez
Employee Employee
Employee

You need other interface with static IP to define as management IP, then you can change the IP of magg

sample 

make sure you are in global.

set management interface bond1

set interface magg0 ipv4-address 192.168.1.5 mask-lenght 24

set management interface magg0

save config

 

then you can re-sic the object. 

 

 

View solution in original post

5 Replies
Dario_Perez
Employee Employee
Employee

You need other interface with static IP to define as management IP, then you can change the IP of magg

sample 

make sure you are in global.

set management interface bond1

set interface magg0 ipv4-address 192.168.1.5 mask-lenght 24

set management interface magg0

save config

 

then you can re-sic the object. 

 

 

Martijn
Advisor
Advisor

Dario,

If you perform the mentioned procedure, the configuration of the Security Group on the MHO is also updated?
Or do we also need to do anything on the MHO like 'Set Security Group Configuration'?

Regards,
Martijn

0 Kudos
emmap
Employee
Employee

The configuration on the MHO is not automatically updated, you can change it manually if you wish but once the Security Group is created the IP address in the MHO DB is essentially cosmetic.

Edit: Lari has corrected me on this, apparently there are times when the MHO DB isn't cosmetic, and hence should be updated when you update the SMO IP. Either by editing it in the WebUI of the MHO if it will let you, or editing the sgdb.json file and doing an orchd restart.

Martijn
Advisor
Advisor

Dario,

What is the best order op steps to perform when changing the IP-address of the SMO when I have a Maestro set as VSX Gateway?

1. Change the IP of the VSX Gateway object on the management with 'vsx_util'.
2. Change the IP on the SMO with the procedure you described here.
3. Change the IP of the Security Group in the orchestrators web GUI.

Is this the correct order, or would you do it some other way?

Why do I need to re-SIC? SIC is based on certificates and those certificates do not change?

Regards,
Martijn

0 Kudos
Dario_Perez
Employee Employee
Employee

VSX is not exactly the same procedure. for VSX is not re-sic is reconfigure. 

you change the VSX management IP using the VSX util, change the IP on object >set vsx off /change IP /set vsx on on SG for MHO edit the sgdb.json nd restart the services. 

0 Kudos