How to Delete Interface not using on MHO

[MarcuzShinz]

Dear Team,

I am currently having a problem with my MHO device, we have 2 MHO devices working Single Site. Previously on the MHO-02 device I plugged the Downlink cable between MHO-02 and SG via port 2/47/1, however I later stopped using this port and switched to port 2/29/1.

Now, when i show command orch_stat on the MHO-02, it still show port 2/27/1 Inactive. I also removed this port from the security group, but somehow it still shows up, it looks like a cache data.

How to remove this interface out MHO-02?

[emmap]

The blunt method would be to remove and re-add the SGM from/to the security group, but it might be something that can be resolved with restarting the MHO. If restarting the MHO doesn't do it then TAC may be able to assist with editing a database file to remove the interface from the config.

[MarcuzShinz]

Thanks for your response, I think, I'll check file /etc/maestro.json and try edit in that file.

[Pre_yo]

Is there any solution for this issue?, i have simililar issue in our environment

[Dario_Perez]

https://support.checkpoint.com/results/sk/sk180831