Unable to find any devices of the type needed for this installation type.

[C_R]

Hi guys,

After using the ISOmorphic tool to put a R77.30 image on it, I turn on my checkpoint T2200 with the USB and the process begins, after a few seconds a have the following error:

I try to select different drivers, but any success with that, can someone help me, because right now my checkpoint is stopped....

Thanks in advance

[AlekseiShelepov]

Errors when machine boots from a USB device formatted by ISOmorphic Tool 

"No Driver Found" error when machine boots from a USB device formatted by ISOmorphic Tool 

Do you also have the correct and latest versions of software?

Check_Point_R77.30_Install_and_Upgrade_T5.Gaia.iso 

ISOmorphic Build 164

The name of appliance should be 2200 (small appliance) or TE2000 (Threat Emulation appliance).

[Reuben_W]

Use the New Isomorphic tool especially for a TE appliance their is an option after the main configuration page to select the appliance versions

[Maarten_Sjouw]

There are 2 options:

1 incompatible USB Stick, have you tried another one?

2 I have problems with the later versions of ISOmorphic that show the menu to let you choose the hardware model. If you can find a version (I think it is 91 or lower) create your stick with that version that should solve your problem.

[Gomboragchaa]

Use the USB 3.0 portable device.