Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
ESTEBAN_CASTILL
Explorer

Sticky Decision Function

In which case is a Sticky Decision Function relevant with Load Sharing ­ Multicast or High Availability?

0 Kudos
4 Replies
PhoneBoy
Admin
Admin

SDF and Load Sharing are not supported together, so only HA.

Refer to: SecureXL and Sticky Decision Function in ClusterXL Load Sharing mode 

0 Kudos
KennyManrique
Advisor

Hi Dameon,


I think you confused the terms with SXL. SDF is relevant on Load Sharing scenarios since the traffic (according to IP, Ports or SPI's) traverses always the same gateway when it's enabled, however as you stated, SecureXL is disabled when SDF is in use. For High Availability, all traffic traverses always the same gateway, so SDF is not relevant.

According to ClusterXL Admin Guide:

Regards.

PhoneBoy
Admin
Admin

Thanks for the correction.

Must have answered that with low caffeine levels Smiley Happy

Timothy_Hall
Legend Legend
Legend

Note that the Sticky Decision Function (SDF) is gone in R80.20+ due to the major overhaul of SecureXL in that revision, and has been replaced with the Cluster Correction Layer mechanism described here: sk169154: Asymmetric connections in ClusterXL R80.20 and higher

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events