R82.10 approximate release date?

[the_rock]

Hey guys,

Any idea when R82.10 will be out as generic availability?

Best,

Andy

[the_rock · Accepted solution]

Asked our SE and was told hopefully end of 2025, but if not, first quarter of 2026.

Regards,

Andy

[ccsjnw]

Isn't R82.10 already considered GA for the new ARM based appliances?

[the_rock]

Not sure...

Andy

[Chris_Atkinson]

3900 series already have a special release of R82.10 see: https://support.checkpoint.com/results/sk/sk183199

Don't believe I've seen the public EA for it yet otherwise which would include the feature additions and support of other appliances.

[the_rock]

I just worked with customer that replaced 4 of their firewalls (3 were 3920) and they all came with R81.20.

Andy

[Chris_Atkinson]

They're not supported with the earlier kernel so worth double checking that.

[the_rock]

I will ask them, but Im 99% sure that was the version on all 3 of those.

Andy

[Timothy_Hall]

I don't think that the Gaia kernel 4.18 used by R81.20 supports ARM, but I could be wrong.

[the_rock]

Im fairly positive you are correct.

Andy

[_Val_]

You are right. The kernel version in R82.10 is 5.14

[Steffen_Appel]

RHEL (the base of GAIA) supports ARM since release 7.4 (kernel 3.10.0-693). 

R81.20 is RHEL 7.9 based.

R82 is RHEL 8.6 based.

[JohnHaynes]

3920s ship with R82.10 - Build 407.  This is to support the 5.14 kernel.

[the_rock]

I never really ran uname -a command on one of theirs 3920, since I dont have the access to them myself, but below is output from one of my VMs...

Andy

[Expert@CP-GW:0]# uname -a
Linux CP-GW 4.18.0-372.9.1cpx86_64 #1 SMP Thu Aug 28 16:01:06 IDT 2025 x86_64 x86_64 x86_64 GNU/Linux
[Expert@CP-GW:0]# fw ver
This is Check Point's software version R82 - Build 008
[Expert@CP-GW:0]#

[Expert@CP-GW:0]# cpinfo -yfw1

This is Check Point CPinfo Build 914000250 for GAIA
[FW1]
HOTFIX_R80_40_MAAS_TUNNEL_AUTOUPDATE
HOTFIX_R82_JUMBO_HF_MAIN Take: 41
HOTFIX_UCA_SSH_TUNNELING_SERVICE_AUTOUPDATE
HOTFIX_UCA_SSH_TUNNELING_APP_AUTOUPDATE
HOTFIX_UCA_INFRA_MONITOR_SERVICE_AUTOUPDATE
HOTFIX_UCA_INFRA_LOG_SERVICE_AUTOUPDATE
HOTFIX_UCA_INFRA_AUTOUPDATE
HOTFIX_PUBLIC_CLOUD_CA_BUNDLE_AUTOUPDATE
HOTFIX_INEXT_NANO_EGG_AUTOUPDATE
HOTFIX_GOT_TPCONF_AUTOUPDATE

[Timothy_Hall]

Yeah, way too easy to mix up R81.20 and R82.10, keep doing it in my class lectures and I have to correct myself.  🙂

[Paul_Hagyard]

What is the situation with support? All of the 3900 appliances (based on https://www.checkpoint.com/support-services/support-life-cycle-policy/) only support R82.10, it seems a very odd move to release new hardware that runs an operating system still classified as early availability. Will they get the same priority as R82 and R81.20 for JHF updates? As of today there is only a single JHF (22) for the 3900 appliances (https://support.checkpoint.com/results/sk/sk183557).

[Chris_Atkinson]

It could of gone the way of the 3.10 kernel version of R80.30 but actually I believe we will have GA1 and GA2 as a result on this occasion.

[Paul_Hagyard]

It appears that R82.10 is not getting the same priority for JHF updates as R81.20 and R82. On a recent deployment we ran into the issue where the initial policy install fails because the updatable objects are not available (workaround is to copy the files from another working gateway). This has been fixed in R81.20 and R82 JHF's but not in R82.10 JHF 22.

[the_rock]

Lets see once its gA.

[Chris_Atkinson]

I've asked about the timeline for the next JHF and will update pending feedback.

/Edit: This is now dependent on confirmation of the GA2 release date.

[the_rock]

Thanks Chris, we appreciate it.

[the_rock]

From discussion with our SE, what Chris said sounds right.

Andy

[the_rock]

Hey Chris,

Just wanted to apologize (as I always do when Im wrong) and I was 100% wrong. As @Timothy_Hall , I totally confused R82.10 with R81.20. I just saw an email from customer and it clearly shows on the screenshot that all 3 3920 fws are on R82.10

Regards,

Andy

[Chris_Atkinson]

No apology needed 🙂

[the_rock]

Its just the right thing to do! As my mom used to say to my brother and I when we were kids "Dont pretend magic fairy ate the icecream, just admit you did and say you are sorry, thats it" : - )

Andy

[_Val_]

Yes, new ARM boxes have to run R82.10, but this is still not the case for the main train

[_Val_]

Well... From what I heard, it should be earlier than that. We plan to have a TechTalk around this release, so stay tuned.

[the_rock]

Good news!

[the_rock]

Considering how great R82 is, Im sure R82.10 will be even better.

Andy

[hle2001]

I just bought two 3920 GWs and it came with R82.10. My plan to replaced our ClusterXL model 3600 running R81.20, but I could not find version R82.10 on Checkpoint website. I am able to download R82 and latest Jumbo hotfix take 43, and 44. Can I upgrade my central Management server from R81.20 to R82 and then perform the ClusterXL upgrade with new pair 3920 running R82.10?

I even request for a Early Access program but have not heard back from Checkpoint yet.

Or do I need to put version R82 on the new 3920?

Thank you,

Robert Lee