Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Jean-Francois_G
Explorer

Migration from a cluster gaia R80.20 running on 4800 to a cluster R80.20 running on 5800

Hello we are running gaia r80.20 Jumbo Hotfix 87 in cluster

We will change the 2 appliances for 2 5800 that will be in cluster and i will install R80.20 Jumbo Hotfix 87 also

Im keeping my management server running on a VM and it's running gaia R80.20 jumbo Hotfix 87 also

After that what step i need to do to export my configuration from the 4800 and put it back on the 5800

Thanks !

0 Kudos
6 Replies
G_W_Albrecht
Legend
Legend

See sk108902: Best Practices - Backup on Gaia OS for the best way to do this ! I would suggest to use both:

System Backup (and System Restore)

System Backup can be used to backup current system configuration. A backup creates a compressed file that contains the Check Point configuration including the networking and operating system parameters, such as routing and interface configuration etc., but unlike a snapshot, it does not include the operating system, product binaries, and hotfixes.

Save Configuration (and Load Configuration)

Allows saving Gaia OS configuration settings as a ready-to-run CLI script. This allows you review your current setup and quickly restore the Gaia OS configuration.

CCSE CCTE CCSM SMB Specialist
0 Kudos
Jean-Francois_G
Explorer

Does the system backup (and system restore) will work if it's take on my 4800 and restore on the 5800 ?

It's not hardware dependent ? 

Should i not use the migrate export instead ? 

0 Kudos
Jean-Francois_G
Explorer

migrate export seem to be only for the management server 

Just tried it on my 2 fw 

[Expert@infFire:0]# $FWDIR/bin/upgrade_tools/migrate

This utility requires the Check Point Security Management Server

So it answer my last question 🙂

SO should this work if i do these steps 

 

  • Install clean gaia r80.20 with jumbo hotfix 87 on my 2 5800
  • Take a backup of my 2 4800 with System Backup (and system restore)
  • Save configuration to a file on both 4800 with Save Configuration (and Load Configuration)
  • Restore backup from my 2 4800 to my 2 5800 with System Backup (and system restore)
  • Restore configuration from the file ive took in step 3 on both 5800 with Save Configuration (and Load Configuration)
  • Remove my backup 4800 and place my new backup 5800 in place
  • Reset SIC for my new 5800
  • Change hardware from 4000 to 5000 in SmartConsole on my Gateway object
  • Push Policy
  • Repeat step 6 to 8 for my old main 4800
  • Push Policy 
0 Kudos
Alex-
Advisor
Advisor

I'd like to share my experience with a cluster of 5800 and R80.20 that's running almost all usual TP blades.

By default they run Xeon processors with Hyperthreading so you have 8 cores. I ran the cluster on R80.20 Take 47 for some weeks.

Then when Take 87 came out, I upgraded the standby member vie CPUSE, it rebooted and rejoined the cluster.

Unit A: R80.20.47, Unit B: R80.20.87.

Causing a ClusterXL failover from unit A to unit B caused a CPU error which completely crashed the box, nothing responded short of serial connection.

Reimage, then reinstall of Take 87: same issue. Try a week later with Take 91 when it becomes GA, same crashes happen. Works fine with Take 47 though so I was stuck to Take 47 on that cluster of 5800.

I'd go with R80.30 Take 19 which is anyway the recommended version, it works and cluster failovers didn't cause these crashes anymore.

0 Kudos
Jean-Francois_G
Explorer

Thanks for the info

But did you try it with both member at r80.20 Take 87 and then do the failover ? 

0 Kudos
Alex-
Advisor
Advisor

Yes, and both crashed at the same time. Anyway I tried with a GA take higher than Take 47, Unit A or B first, a failover caused a CPU exception which broke the box and couldn't be recovered short of a reimage.

 

It's the only 5800 cluster I have under my care, so I don't know if others with the same systems encountered the same issue.

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events