IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10)

[TAEKBOM_Kim]

Hi all,

I will configure site to site IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10).
I wonder Is it possible?

No.1
=> Has anyone configured IPsec VPN between Junifer and CheckPoint(R80.10)?
  :

No.2
=> Can I get some resources? How to configure IPsec VPN between Junifer and CheckPoint(R80.10).

   :

Thank you!!

[Nüüül · Accepted solution]

Hi,

it depends a bit, in what you will need to configure. But in most cases this works.

here is a good start:

How to set up a Site-to-Site VPN with a 3rd-party remote gateway 

Regards

Daniel

[Timothy_Hall]

Juniper boxes are quite picky about what Proxy-IDs/subnets they will accept in an IKE Phase 2 proposal sent by a Check Point.  You will almost certainly need to make the user.def modifications described in Scenario 1 of sk108600: VPN Site-to-Site with 3rd party.  Fortinet and Sonicwall devices are similarly picky.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com