Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
TAEKBOM_Kim
Contributor
Jump to solution

IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10)

Hi all,

I will configure site to site IPsec VPN between Junifer(SSG 6.3.0 r25) and CheckPoint(R80.10).
I wonder Is it possible?

No.1
=> Has anyone configured IPsec VPN between Junifer and CheckPoint(R80.10)?
  :


No.2
=> Can I get some resources? How to configure IPsec VPN between Junifer and CheckPoint(R80.10).

   :


Thank you!!

1 Solution

Accepted Solutions
Nüüül
Advisor

Hi,

it depends a bit, in what you will need to configure. But in most cases this works.

here is a good start:

How to set up a Site-to-Site VPN with a 3rd-party remote gateway 

Regards

Daniel

View solution in original post

0 Kudos
2 Replies
Nüüül
Advisor

Hi,

it depends a bit, in what you will need to configure. But in most cases this works.

here is a good start:

How to set up a Site-to-Site VPN with a 3rd-party remote gateway 

Regards

Daniel

0 Kudos
Timothy_Hall
Legend Legend
Legend

Juniper boxes are quite picky about what Proxy-IDs/subnets they will accept in an IKE Phase 2 proposal sent by a Check Point.  You will almost certainly need to make the user.def modifications described in Scenario 1 of sk108600: VPN Site-to-Site with 3rd party.  Fortinet and Sonicwall devices are similarly picky.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events