ICAP troubleshooting

[andy_currigan]

We configured one of our cluster R80.x as client ICAP to in reqmod.

reading the following implementation guide there's no mention about logging and troubleshooting.

https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_ThreatPrevention_AdminGuide/...n_Gateway_mode.htm

in the configuration file there's an attribute to log but we did not find any log... 

someone has some experience on how to troubleshoot this kind of integration?

thanks

[stevegut]

In the ICAP Client configuration file ($FWDIR/conf/icap_client_blade_configuration.C) there’s an attribute ‘log_level’, by default it’s set to 0, no logs.

In order to get logs you should set that to 1/2/3.

You can find more info about the log_levels here:

https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_ThreatPrevention_AdminGuide/...

[stevegut]

In the icap configuration file ($FWDIR/conf/icap_client_blade_configuration.C) there’s an attribute ‘log_level’, by default it’s set to 0, no logs.

In order to get logs you need to change the value to 1/2/3.

More info at:

https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_ThreatPrevention_AdminGuide/...

[andy_currigan]

i set the log value to 2 but I can't find the log file.

what is the name? where should be located?

thanks

[stevegut]

The logs appear in SmartConsole.