Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Equipe_reseau
Participant

Hit in /proc/interrupts

Hello team,
I have one question about SND:

Our SND on core 0 and has never autobalanced, all in core 0

[Expert@XXXXXX:0]# sim affinity -l
eth0 : 0
eth3 : 0
eth1 : 0
eth2 : 0

But why the number of hits on other CPUs are appeared (CPU1,CPU2) ?

[Expert@XXXXXX:0]#cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
67: 412471638 613 0 0 IO-APIC-level eth0, eth3
75: 909964861 0 12 0 IO-APIC-level eth1
83: 954314010 0 115 0 IO-APIC-level eth2

Thanks

0 Kudos
5 Replies
_Val_
Admin
Admin

Version, amount of CPUs?

0 Kudos
Equipe_reseau
Participant

R80.30, 4 CPU, CPU 0 for SND and others for firewall workers

0 Kudos
_Val_
Admin
Admin

The data from proc/interrupts is weird. Reboot, check again. All cards should be served by CPU0. 

Equipe_reseau
Participant

Hello _Val_,

Thanks for replying to me. We are using 4CPUs.

[Expert@XXXX:0]# fw ctl affinity -l -r
CPU 0: eth0 eth1 eth2 eth3
CPU 1: fw_2
mpdaemon lpd vpnd fwd in.acapd in.asessiond cpd cprid
CPU 2: fw_1
mpdaemon lpd vpnd fwd in.acapd in.asessiond cpd cprid
CPU 3: fw_0
mpdaemon lpd vpnd fwd in.acapd in.asessiond cpd cprid
All:
 

BTW, thanks for your suggestion again. I'll try to reboot and check it again.

Thanks

0 Kudos
Timothy_Hall
Legend Legend
Legend

It is possible those wayward interrupts on CPU1 and CPU2 happened very early in the boot process, before all the interfaces could be affined to CPU0.  As Val said try rebooting, if my theory is correct there will still be some wayward interrupts on CPUs other than 0.  As long as the overwhelming majority of interrupts are on CPU0 in your split config I don't think it is a problem.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events