Execute CLI commands on selected gateways simultaneously ➜ SmartConsole Extension

[HeikoAnkenbrand]

After about 1400 lines of code and many programming hacks, I would like to present you my new extension:

"Execute CLI commands on selected gateways simultaneously".

This allows you to execute Expert Mode commands and CLISH commands from the SmartConsole on selected gateways simultaneously.

Install the extension

1) On SmartConsole, go to Manage & Settings > Preferences > SmartConsole Extensions > +.

2) Enter the web-service manifest URL
https://www.ankenbrand24.de/ex/command.json
and click OK.

Execute "Expert Mode" command on selected gateways simultaneously

3) Open the menu item "Expert Mode". The same works with CLISH commands in the menu "CLISH".

4) Enter the command you want to execute on the selected gateways.for example "uname -a"

5) Select the gateways on which the command should be executed and click "Execute on selected GW".

More about the Extension

SmartConsole extension to execute commands on all gateways and the SMS.

• Execute commands  in  "Expert Mode" and "CLISH"
  
• Execute "Expert Mode" and "CLISH" commands on all gateways simultaneously.
  SMB applications are currently not supported.
  
• Command history -> Execute the last 20 commands again.
  
• Status about the success of the action
  
• Open a CLI command in SmartConsole with one mouse click and execute the command on a gateway.

Here you can find the original article with the extention:
Execute Commands ➜ SmartConsole Extension