Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
sasikumar_s
Explorer

Error: VSX default gateway is different on GW1() and GW2().

Hi all

I have running Gaia R76 and when i create VSX cluster using Multi domain server, I'm getting the following error but i have default gateway configured on both Firewalls

Error: VSX default gateway is different on GW1() and GW2().

0 Kudos
6 Replies
Vladimir
Champion
Champion

Well, they are different, if you are specifying local eth port.

Try using IP of the router on both cluster members.

0 Kudos
sasikumar_s
Explorer

Hi Vladimir,

Thanks for reply

I have already tried using IP but no luck

Thanks

0 Kudos
Vladimir
Champion
Champion

Please be a bit more accurate in describing actual topology of your environment.

The internal and external interfaces of VSX units should be connected to the switches (or VLANs), not routers and MDS as depicted in your diagram.

Additionally, your MDS is assigned IP address in the same network as the interfaces connected to the router on the right side, while VSX interfaces connected to it are in a different network.

192.168.43.1 should be assigned to a VLAN interface, if you are connecting to a L3 switch or to the upstream router, if you are connecting to L2 VLAN.

0 Kudos
sasikumar_s
Explorer

HI Vladimir,

Please find the clear topology

Thanks for your reply

0 Kudos
Vladimir
Champion
Champion

OK. So you are trying to build this environment in the VMware workstation.

Not the best option, IMHO, but you work with what you have.

Let's start with this:

And attach eth1 interfaces to the VS' not the VSX themselves.

Better yet:

0 Kudos
sasikumar_s
Explorer

Hi Vladimir,

Thanks for your reply and i will try this and back to you

Sasikumar.S

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events