Enable DHCP Relay in gateways managed by smart-1 cloud

[FenZ45]

Hi Experts.

We want to apply a DHCP Relay configuration for ClusterXL gateways (R81.20), managed by smart-1 cloud.

But the advanced routing guide for this configurations says that we need to edit and change certain information of the "table.def" file....

https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_Gaia_Advanced_Routing_AdminG...

How do i manage to do that? There's no cli for the smart-1 cloud.

Is there any other way to enable DHCP relay whitout configuring this parameter?

Thanks in advance.

Regards.

[the_rock]

I had to do similar 3 years ago initially working with smart-1 cloud. Btw, I would verify with TAC 100% modification is needed on mgmt server, because if so, the best you can do from portal is restart the cloud instance, but if file modication is absolutely needed, TAC has to do it on back end. Just make sure you request someone who has access to your S1C instance to do it, thats all.

Hope it helps.

Andy

[Wolfgang · Accepted solution]

@FenZ45 since some month you can change some of the .def files via the infinity portal

[the_rock]

Hm...did not see that anywhere, even in upgraded R81.20, will confirm later. Tx for verifying.

Andy

[the_rock]

Glad you pointed this out @Wolfgang 👍. I definitely missed that option, but if I ever need it, its there.

Cheers,

Andy

[FenZ45]

Hi.

Thanks for the help!

I've created a SR ticket, and the TAC also pointed what @Wolfgang mention.

I'll do that to configure the DHCP relay.

Again, many thanks for the help!.

Cheers!