CP7000 LOM java

[mp2012]

Hi,

I tried some hours getting connected to a console via LOM on CP7000 - no luck.

Its an "old" quantum lom (firmware 5.12), so no, no easy connection via html5. I have to get java up and running. Anyone could point me to a combination of java openjdk, ice tea websstart, browser versions... whatever which is known to work?

System is a Windows 2016 standard server. I checked sk147153 (tried OpenJDK 8 with IcedTea-Web on Firefox and Internet Explorer)

Thanks for any advice!

kind regards,

mp2012

[G_W_Albrecht]

This is the old LOM card with newest firmware:

sk167336: LOM firmware versions for Check Point 6200 / 6400 / 6600 / 6700 / 6900 / 7000 16000 / 1620...

sk123565: JViewer console on LOM card is unable to start

sk98490: LOM KVM remote console does not work after upgrading Java to version 7 update 51 (7u51) and...

sk117355: Browsers supported to work with LOM card WebUI

sk92652: Consolidation of Lights Out Management (LOM) solutions

[Danny]

Try ipmitool mc reset cold in expert mode first to restart the Java-based LOM. This should solve some issues. You should also be able to verify you other LOM settings via ipmitool before you try to connect via Web browser. The latest Oracle Java version should be just fine, just make sure you disable any security checks. Best practice is to replace these old LOM cards with newer HTML-5 based LOM cards.

Also see:

• sk88064 - Check Point Appliances LOM Card Firmware versions map
• sk179516 - LOM Card Recovery Procedure
• sk123565 - JViewer console on LOM card is unable to start

[mp2012 · Accepted solution]

Hi,

thanks for reply - problem was solved by using oracle java instead of openjdk / icetea webstart. This one works with internet explorer + java extension and accepting a few security prompts.

kind regards,

mp2012